Adjustable Car Seat Cover 0-120° Replaces Minor Black Refrigerant Filling

Features: 1. Adjustable, shock-resistant, and wear-resistant, this is a replacement for the IVECO RV armrest. 2. It can be installed on the right side of the driver's or passenger's seat; the recess size is 55 mm / 2.16 inches. 3. Commonly used in cars, caravans, motorhomes, vans, boats, trucks, excavators, engineering vehicles, etc. 4. These comfortable armrests provide a more comfortable driving experience and are rotatable. 5. Universal type, as no specific vehicle or seat fits, so an adapter card may be required and you may also need to drill new mounting holes. Specifications: Item Type: Car Seat Armrest Material: PU, Foam, Plastic, Metal, Integral Polyurethane Foam Key Component Type: PU Foam, ABS Backing, Metal Mounting Bracket Color: Black Adjustable Range: 0-120° Mounting Size: Approx. 55 mm/2.16 inches Position: Right side of the driver's or passenger's seat Armrest contact: Full polyurethane foam Features: Adjustable, shock-resistant, wear-resistant Recommended installation height: The distance between the seat cushion and the bottom of the armrest should be 11 cm/4.33 inches (or 2 cm/0.79 inches from top to bottom as needed) How to use: Install on the right side of the seat. Installation instructions: 1. Open the seat back cover. 2. Sit in your seat and mark your most comfortable position. 3. Drill two holes at the mark you made. 4. Use screws to attach the armrest bracket to your seat. 5. Make a small hole in the foam and remove the foam rod. 6. For the cover, repeat the previous step. 7. Attach the armrest to the part from the outside and secure it with screws. 8. Place it on the cover. Package List: 1 x Car Seat Armrest 2 x Mounting Screws 2 x Nuts 2 x Gaskets Note: The product is secured with screws, and the mounting holes are spaced 5.5 cm apart, so you can drill your own holes for installation. Before purchasing, please check if the seat has an armrest mounting point and if the width allows for the spacing of the armrest mounting holes before drilling.