Adjustable Electric Engraving Pen for Metals, Porcelain, Glass, and Plastic - Jewelry Tool, 220V, Length 216.6 cm

It is equipped with speed control and a pen-shaped handle for easy creative expression. It is suitable for engraving on metal, wood, glue, porcelain, glass, and leather.

Electric engraving pen, cutting plotter, marking pen, engraving machine. The electric engraving pen and engraving pen are characterized by their small size, light weight, easy engraving, fast speed, portability, ease of use, and permanent marking. It is widely used for engraving on the surface of almost any material such as metal, jade, glass, plastic, marble, wood, etc.

Voltage range: 220V Power: 8W

Five-speed setting! Arbitrary permanent pattern text; With a large concave depth, the deepest engraving depth can reach 1 mm depending on the material's hardness. This electric engraving pen has a small and exquisite design, is lightweight, easy to carry, and quick and convenient to use. It is highly praised by consumers. This tool offers a fast and easy way to preserve markings on materials. The principle of the electric engraving pen: It uses the periodic frequency characteristics of alternating current to produce forced vibrations (up and down vibrations) to operate the pen tip. Therefore, a noticeable noise will be produced during the working process (engraving pens based on this principle do have some noise), so those sensitive to noise should be careful! How to use the electric engraving pen: When using it, hold the body in your hand, tilt it slightly at an angle (approximately 45 degrees) like a pen for writing, and place your hand on the table. Do not press too hard when writing, as the writing is easier than usual. Slightly slower. Move the engraving tool across the physical object. Wherever it passes, it leaves marks. Adjust the gears appropriately for different materials. Master its performance through repeated engravings to meet the font size and depth requirements for engraving various materials. Product Introduction: The electric engraving machine is a new engraving instrument. The product is small and exquisitely designed, lightweight, easy to carry, and quick and convenient to use. It is highly regarded by consumers. Not only can it play a role in classification marking in scientific research and industrial production, but it is also widely used in commercial and domestic settings. In craft production, the engraver also has its unique applications. This instrument is the fastest and easiest way to permanently mark materials and can engrave letters and designs on almost any material, such as metal, ceramic, and wood. Mechanical principle: It uses the periodic characteristics of alternating frequencies to generate forced vibrations (up-and-down vibrations) to move the pen tip. Therefore, there will be a certain tolerable noise level during the working process (pencils using this principle do have some noise), so those sensitive to noise should be aware of this. How to use: Tilt the pen slightly at an angle (approximately 45 degrees) as if you were holding a pen to write and rest your hand on the table. Do not press too hard while writing, and the writing speed will be slightly slower than usual. This can be adjusted by changing the gear position. Master its performance through repeated engraving to meet the font size and depth requirements for engraving different materials. Note: Continuous operation should not exceed 20 minutes to avoid damaging the coil. Intermittent use can ensure the body's lifespan. When the casing is hot, it must be cooled before use. Please turn off the power when not in use! Note: The data is measured manually; please allow a 1-3cm error. Due to differences in lighting and screen settings, there will be some color variation; the actual product received will prevail.