Adjustable infinite cycle time delay relay module, timed on/off switch (DC24V, 0-15min)

Features:

1. This is a time-delay relay module with high-precision, stable, and reliable performance. 2. Supports two modes: single-use (one-time) mode and cycle mode. You can easily switch between modes by adjusting the jumper. 3. There is a wide time range that you can set; both the on and off times are adjustable. 4. It is ideal for controlling alternating cycles or repetitive on/off cycles for equipment and product burn-in testing.

5. Widely used in timer operation equipment, repetitive machine test circuits, intermittent aquarium pumps, etc.

Specifications:

Features:

This is a time-delay relay module with high-precision, stable, and reliable performance. Supports 2 modes, single-use mode and cycle mode, and you can easily switch between modes by adjusting the jumper. There are numerous voltage and time ranges to choose from; the "on" and "off" times are adjustable. It is ideal for controlling alternating current or repetitive power on/off for equipment and burnt-in-test products.

Widely used on timer operating equipment, machine repetitive test circuits, intermittent aquarium pumps, etc.

Specifications:

Type: DC5V, 0-15 min / DC5V, 0-60 min / DC12V, 0-15 min / DC12V, 0-60 min / DC24V, 0-15 min / DC24V, 0-60 min (optional) Max.

Load Capacity: 10A 250VAC, 10A 30VDC

Size: 70*20mm / 2.75*0.78" Time Error: T1 (relay activation delay time), T2 (delay time) (Relay deactivation)

One-Time Mode (Jumper OP3): 1. The module is powered on. When triggered, the relay is activated, delays T1, and then the relay is disconnected.

2. When triggered during the delay process, it will immediately stop the delay.

Cycle Mode (Jumper OP4): 1. The module is powered on. When triggered, the relay is activated, delays T1, and then the relay is disconnected, delays T2, and then the relay is reactivated. This cycle repeats. T1 and T2 are set by two adjustable resistors, respectively.

2. When triggered during the delay process, it will immediately stop the delay.

How to quickly set the time: The time can be quickly set by measuring the voltage (Uc) across the resistor. Take a 5V 15-minute module as an example. If Uc = 2V, time = 2V/5V * 15 min = 6 min. The package includes: 1 x Time Delay Relay Module