Adjustable Infinite Cycle Time Relay Module, Time Delay On/Off Switch (DC24V, 0-15min)

Features:

1. It is a time relay module with high precision, stable and reliable performance
2. Supports 2 modes, mon (once) mode and cycle mode, and you can simply switch modes by adjusting the jumper
3. There is a wide range of time you can set, both on time and off time are adjustable
4. It is ideal for controlling reciprocating stroke or repetitive power on and off for burn-in testing of equipment and products.
5. Widely used on timer operation equipment, machine repetitive test circuit, aquarium intermittent pump, etc.

Specifications:

Features:
This is a time relay module with high precision, stable and reliable performance.
Supports 2 modes, mon (once) mode and cycle mode, and you can simply switch modes by adjusting the jumper.
There are many voltage and time ranges for your choice, the "on" and "off" times are adjustable.
It is ideal for controlling alternating stroke or repetitive power on and off for equipment and burnt-in test.
Widely used on timer operating equipment, machine repetitive test circuit, aquarium intermittent pump, etc.
Specifications:
Type: DC5V, 0-15min/DC5V, 0-60min/DC12V, 0-15min/DC12V, 0-60min/DC24V, 0-15min/DC24V, 0-60min (optional)
Max. Load capacity: 10A250VAC, 10A30VDC
Size: 70*20mm / 2.75*0.78"
Time error:
T1 (the relay turn-on delay time), T2 (the relay turn-off delay time)
One time mode (OP3 jumper):
1.The module is powered on, when triggered, the relay is activated, delays T1 and the relay is disconnected.
2. When triggered on the delay process, triggered again, it will immediately interrupt the delay.
Cycle mode (OP4 jumper):
1. The module under power, when triggered, the relay is turned on, delays T1 and the relay is disconnected, delays T2, the relay is turned on again. This cycle. T1 and T2 are set by two adjustable resistors, respectively.
2. When triggered on the delay process, triggered again, it will immediately interrupt the delay.
How to quickly set the time:
The time can be quickly set by measuring the voltage (Uc) of the resistor. Take a 5V 15min module as an example. If Uc = 2 V, time = 2 V/5 V * 15 min = 6 min.
Package includes: 1 x Time Relay Module

-Contact our customer service in case you need further assistance