Aiperq Flood Barrier Threshold Bar Folding Door Seal Interior Shower Bath Screen Strip for Wet and Dry Separation Suitable for Kitchen and Bathroom (100cm, White)

• Pliable and étanche: The self-gluing étanchéité band of barrage is firmly placed to empêcher the eau de s'écouler. It is sturdy and pliable. It can be used in a flexible way depending on the shape of your lips to form a small burst of water, offering a good locking effect of the water. The grille of the shower is white in appearance, so it is perfectly suited to the environmental environment. indeformable. Separate dry and humid substances. You can easily cover the long hair and steal the water retention which is flexible enough to create different shapes. The surface is easy to clean, just remove it with a damp chiffon, as usual.
• Easy to install: 1. Remove the surface with a chiffon. 2. Put the emplacement in superbrillance. 3. Collect the appliance and collect the water retention band according to the brand position. 4. Pour the water in place. 5. Remove the water retention bands from the two ends and collect the two edges. 6. Leave the water stored for 24 hours. cuisines and sinks. Impermeable and anti-poussière, forming a dry and humid separation protection, to guarantee that your sun is dry and proper; This way, to ensure the safety of your family, it can equally be used on a flat door or a wooden door.

Douche joint
-Easy to remove: create different shapes to suit your bathroom or to your kitchen.
-Très adapté aux douches sans courbes et autres zones qui doivent contenir de l'eau: sous le rideau de douche, à côté du receveur de douche, seuils de salle de bain, éviers à poser, machine à laver, éviers.
Spécification:
Couleur: white, black, grey, transparent
Materiel: TPE
Longueur: 100cm
Installation stages:
* Tout d'abord, veuillez netyer soigneusement le sol et le garder au sec. This step is very important!
*Afterwards, determine the installation position of the water retention band, then mark it on the sun with a stylus.
* Remove the stolen items next to the two of the water retention band and collect them on the sun in the current position précédemment.
* Finally, to avoid tomber, dry it for 24 hours to avoid all contact with the water.
Remark: Clean the surface and assure yourself that it is dry before installation, and remove all existing water leaks. Please use a dryer to chauffer the bottle before using it to obtain better adherence.
[Special information] The water retention belt can be used next to the bottle. Apply the top of the two edges of the waterproof barrier and cut it uniformly. If the two edges and the two ends are fixed with the top, it will last longer.