Aluminum alloy table cutting guide for woodworking – For mechanical processing

Practical Design: Our guide rollers are mounted at a 5° angle, precisely guiding your workpiece to the stop. This angle optimizes the rollers' grip and prevents the wood from slipping in the feed direction. Material: Aluminum Alloy: The table saw press is made of a lightweight and robust aluminum alloy, preventing deformation and ensuring long-term stability and reliability. Adjustable Position: The press roller's position can be adjusted horizontally (left and right), allowing for the processing of workpieces of varying widths and thicknesses. Tension Regulation: The press roller features a tension regulator. Under spring tension, the roller arms hold your workpiece firmly in position, ensuring stability throughout the entire cutting process. Unidirectional Roller Bearings: Equipped with unidirectional roller bearings, the rollers rotate only in the feed direction. This effectively prevents wood kickback and increases safety. Flexible Application: The width of the roller handle can be adjusted to accommodate different workpiece sizes, and the handle rotates 180°. Versatile: With a vertical travel of 80 mm and the ability to work with workpieces up to 70 mm above the mounting surface (when attached to the T-rail), these guides offer complete control, even with wide boards or large panels. Practical design: Our guide rollers are mounted at a 5° angle, guiding your workpiece to the stop. This angle improves the rollers' grip and prevents the wood from slipping in the feed direction. Material: Aluminum alloy. The table saw press is made of a lightweight and robust aluminum alloy that prevents deformation and ensures long-term stability and reliability. Adjustable position: The press roller's position can be adjusted horizontally (left and right), allowing for the processing of workpieces of varying widths and thicknesses.