Anti-Vibration Rubber Lined U-bolt and Backing pad 168 mm ID (suit 150 mm NB pipe)-T316 SS

Anti-Vibration Rubber Lined U-bolt and Backing pad 168 mm ID (suit 150 mm NB pipe)   U-Bolt is T316 Stainless steel   Sleeve and Pad are made from Vibro 200, a high performance silicone compound designed for high temperature applications. It has a good resistance to seawater and excellent resistance to steam.   Temperature range: -40 / + 200 C   Hardness (IRHD): 65-75 Tensile Strength (Mpa) : 1.4 (min) Lateral Flow (% @ load 0.35 Mpa): 0.28 Lateral Flow (% @ load 0.70 Mpa): 0.45 Recovery (% @ compression load 2.75 Mpa) : 90 Load bearing capacity (static load Mpa) : 0.70   C/W 2 nuts on each leg   NB = 150 mm Pipe O/D = 168.3 mm B = 105 mm C = 123 mm F = 180 mm G (Bar Diameter) = 16 mm K = 120 mm M = 189 mm X = 168 mm D*A (backing pad) = 50*15 mm   Advantages:    - Reduce or eliminate noise and fatigue due to vibration of pipework against the supporting structure    - Prevention of galvanic corrosion due to the contact of dissimilar metals in the presence of an electrolyte    - Prevention of wear and / or crushing of composite, thin wall or non-ferrous pipework   Also available in Zinc plated or galvanised steel. Please contact us for details   Material Finish   T316 Stainless Steel is suitable for anywhere you would use T304 BUT has the added advantage of being suitable for marine solutions. The molybdenum increases the corrosion resistance to withstand attack from many industrial chemicals and solvents and of course chlorides    Tolerance on dimensions +/- 1 mm. Please note that as we use roll threading, the bar diameter is slightly less than the thread diameter