Aufblasbares Boot Sup Pumpe Adapter Standard Schrader Konventionelle Luftpumpe Luftventil Adapter Speichenplatte Befestigung

General Description The inflatable valve adapter will allow you to connect any standard electric pump, floor pump or compressor to the Schrader valve fitting, the standard valve for car and bicycle tires. It works on most inflatable boards as well as boats and kayaks using the Halkey-Roberts valve for inflation. This adapter is only intended to facilitate inflation and the speed at which your board inflates will depend on the pump used. Technical Specifications Valve Type: Schrader Maximum Pressure: 20 psi Installation Remove the SUP valve cap and ensure the valve is sealed for inflation by rotating the center pin to the outboard/closed position. Insert the valve adapter into the SUP valve as you would insert the pump hose nozzle. Connect any standard Schrader pump to the valve adapter to inflate your board.Usage It is recommended to inflate the board with a hand pump until it becomes difficult to pump, then use the adapter to complete the pressure. Check the board pressure frequently to avoid over-inflation.