Automatic and silent condensate drain pump (19 dB) with 200 ml water tank, flow rate 100 l/h, suitable for heating, ventilation, air conditioning, dehumidifiers, ovens and air conditioners, 220 V, 50

Features: 200ml Water Tank and High Flow Rate: Our condensate pump features a 200ml water tank, which holds enough water to empty the ice maker. The 100L/h flow rate ensures efficient and rapid emptying. This creates a dry environment for the ice cubes, preventing them from melting too quickly. 25W Motor and Quiet Operation: Our compact condensate pump features a 25W motor. With a noise level of only about 19 decibels, it offers high performance with low noise (typically 40 to 60 decibels) and will not disrupt your daily life. The vent also ensures rapid heat dissipation, reduces noise, and improves stability. Ready for Instant Use: Our condensate pump features an automatic start/stop function. As soon as the water level reaches the lower probe, the pump starts. Once it is full, it automatically drains. It features a 25mm diameter water inlet and easily connects to your commercial ice maker or air conditioner. High Water Safety Switch: Two wires can be connected directly to the unit to create a safety switch. Once the sensor detects a high water level in the tank, the safety switch activates and the unit automatically shuts off to prevent the tank from overflowing. Make sure the pump is mounted vertically on a flat surface or wall. Versatile Use: This mini condensate pump is ideal for use with our commercial ice makers, whether they are tabletop, basement, floor-standing, or split systems. It is widely used in homes, beverage shops, offices, shopping malls, etc. Specifications: Item Type: HVAC Condensate Pump Model: QL5018 Material: ABS Motor Power: 25W ± 2 Maximum Head: Approx. 1.8m / 5.9ft Maximum Flow Rate: 100L/h Water Storage Capacity: 200ml Inlet and Outlet Outer Diameter: Approx. English: 25mm / 0.98in Noise Level: 19dB(A) Operating Mode: Non-Continuous Operating Ambient Temperature: 0°C to 50°C Application Installation Steps: 1. The outlet of the air conditioner (water source) should be slightly higher than the inlet of the water pump. 2. 1. Mount the drain pump in a suitable position to ensure that the condensate can flow freely into the pump housing. 2. Connect the water inlet and outlet pipes, tighten them with a hose clamp, and make sure they are level during installation. 3. When installing the water pump, a drain opening facing upwards 20 to 50 cm above the highest point of the horizontal pipe must be provided to ensure adequate drainage. 4. Once the system is properly connected, make sure the condensate pump is turned on and turn on the air conditioner. Verify that the condensate pump is working properly. Package Contents: 1 x condensate pump, 1 x connection cable, 3 x hoses, 2 x mounting hardware, 2 x screws, 2 x expansion tubes, 1 x mounting bracket, 1 x mounting accessories