Automatic Condensate Pump for Air Conditioning AC110V–240V, Wall-Mounted Drain Pump, Miscellaneous Accessories, Pumps, 24L/h

General Description

The automatic condensate pump is designed for draining condensate from air conditioning units. It should only be used with condensate and is not suitable for corrosive liquids. This pump must not be immersed in water, as this could lead to a risk of electric shock. Its installation and maintenance must be carried out by professionals to ensure safety.

Technical Specifications

• Power: 3 W
• Maximum Flow Rate: 24 L/h
• Noise at 1 meter: 19 dB(A)
• Drive Mode: Electric
• Operating Temperature: 0-50 °C
• Recommended Maximum Head: Approximately 10 meters / 32.8 feet
• Water Storage Tank Capacity: 50 ml
• Maximum Cooling Capacity of Applicable Air Conditioner: 30,000 BTU/h (up to 3 HP)

Compatibility and Accessories

• 1 x Drain Pump
• 1 x User Manual
• 1 x Connector
• 1 x Nut
• 2 x Hoses Water and loop
• 1 x elbow
• 1 x air hose
• 1 x anti-siphon kit
• 1 x adapter
• 7 x cable ties

Installation

It is recommended to install a separate power cord to ensure a continuous power supply to the pump. Ensure the pump is not connected to the power supply during installation or adjustment.

Operation

Use the pump in an indoor environment, avoiding areas with dust or oil. Proper use and maintenance will prolong the pump's service life. Check and clean the unit regularly for optimal operation.

Other information

The pump is equipped with a built-in relay that starts when the warning water level is exceeded, thus cutting off the power to the air conditioning unit. If you experience any problems, turn off the unit and contact a professional for inspection and repair.