Automatic drain valve G1/2 Dn15, automatic timed electronic drain valve for air compressor condensate management (230 V AC)

INSTRUCTIONS: This reliable, high-quality condensate drain valve ensures optimal operation of compressed air treatment equipment. PROGRAMMABLE: This timed electric drain valve can be programmed to drain condensate at regular intervals, depending on conditions. OPENING AND CLOSING TIMES: The opening time is adjustable from 0.5 to 10 seconds, and the closing time from 0.5 to 45 minutes. AUTOMATIC OPERATION: Its automatic operation reduces compressed air consumption during condensate drainage. GENERAL USE: The G1/2 thread is widely used and compatible with most air compressors. Features: This reliable, high-quality condensate drain valve ensures optimal operation of compressed air treatment equipment. The timed electric drain valve can be programmed to drain condensate at regular intervals, depending on conditions. The valve opening time is adjustable from 0.5 to 10 seconds and the closing time from 0.5 to 45 minutes. It operates automatically and reduces compressed air consumption during condensate drainage. The G1/2 thread is widely used and compatible with most air compressors. Specifications: Voltage: 110V AC, 230V AC (optional); Valve material: brass; Valve type: independent; Operating modes: direct acting; Interval (off): 0.5 to 45 min; Drain time: 0.5 to 10 s; Thread: G1/2 (DN15); Thread outside diameter: approx. 20.6 mm; Pressure: 0 to 1.6 MPa; Fluid: air, water; Fluid temperature: -5°C to 80°C; Flow direction: unidirectional. Package contents: 1 drain valve. Note: The 230V AC version can also be connected to a 220V AC power supply.