Automatic permanent magnet brushless DC motor booster pump for home irrigation, 100W, 24V, Black, 100-240V, EU Plug

1. APPLICABLE French: SCENARIO: The shower booster pump is applicable to faucets, toilets, boilers, showers, bathrooms, kitchens, water heaters, solar systems, and is also used for garden use, agricultural irrigation, domestic water supply systems, etc. 2. FOUR FUNCTIONS: 1. Intelligent AI Learning: Creates efficient depressurization patterns based on different water pressure conditions; 2. Intelligent Start and Stop: When the water pump is in automatic mode, it starts and stops automatically with the tap switch; 3. Low Pressure Start: If the machine cannot start automatically once the water flow is too low, you can press the switch button to switch to low pressure mode; 4. Water Shortage Protection: When the water inlet to the pump is close to zero, the pump stops working, and automatic protection is activated. 3. COMPACT AND LOW NOISE: The pressure booster pump is small in size and can be installed by hand; you simply need to use a wrench to connect the pump to the pipe. It can be easily installed, is simple and practical, and operates quietly. 4. POWER AND FLOW RATE: Mini solar-powered 24V DC pump with a power of 100W and a maximum flow rate of 25L/min with a stainless steel connection pipe. 5. TECHNICAL PARAMETERS: Permanent magnet brushless motor with centrifugal turbine, quiet and energy-saving operation, equipped with a plug for domestic pressure pressurization. Integrated AC-DC converter, suitable for voltage and frequency 50Hz/60Hz, applicable to various power supply scenarios.6. FULLY AUTOMATIC CONTROL: The pressure booster pump is equipped with an intelligent sensor system that first uses water and then stops when the water supply is cut off, automatic control, easier to use.Specification Item Type: Booster Pump Current: 4.2A Insulation Level: Class H Protection Level: IP56 Boost Pressure: 100Pa Motor Power: 100W Noise: Low Tone Open Mode: Dual Manual or Automatic Water Flow Control Flow Rate: 25L/min Head: Approximately 25 meters/82 feet Hot Pipe Diameter: Approximately 15mm/0.59in Fluid Temperature: 0-65°C Ambient Temperature: 0-40°C Average Temperature: 4-80°C Output pressure: 2 bar Maximum pressure: 1 MPa Connection method: Threaded Package list: 1 pressure booster pump 1 power adapter 1 threaded hose 1 user manual 2 screws 2 wall plugs 1 sturdy pole