Automatic sensor soap dispenser, smart home electric mobile phone washing, black texture csparkv-eu

The store is for you!

The scope of delivery is subject to the first picture, the other pictures are the display effect

The easy-to-use, touchless, automatic soap dispenser has a precise trigger area that can accurately identify your hand. Place your hand under the sensor to operate the dispenser. The powerful pump dispenses soap for 2 seconds with a few clicks, 1 ml at a time, if you need more, place your hand under the sensor and wait another 2 seconds, it will start sucking again.

Waterproof and stable deep base structure. This soap dispenser can be cleaned without cleaning. The IP67 waterproof rating of the whole machine can prevent the battery box from being immersed in water, otherwise it will cause corrosion, making the dispenser unusable. The floor is non-slip and airtight.

It has a wide range of uses. The soap dispenser is suitable for homes, bathrooms, kitchens, hospitals, banks, offices and other public places. Human hands will automatically absorb the liquid to avoid secondary cross-infection.

Attention

Keep ventilation during use, alcohol is flammable. Open flames are strictly prohibited.

Before use, remind children not to open or eat, and place it in a place where it is not easy to fall.

Do not add too much alcohol. It is best to reserve 85% of the capacity. Too much alcohol can easily spill and damage the product.

If your hands are not easy to detect and you cannot pour the liquid, the concentration of the liquid may be too high (one type of alcohol is recommended: three types of water). Please dilute the soap.

Basic skills:

1: Sensing distance, the actual distance between the sensor trigger port and the palm is 2-3 inches;

2: The factory default liquid output is: 1ml (if you need certain requirements, you can set it according to your needs before leaving the factory); after a 2-second pause, the second liquid will be ejected (if the pointer stays for more than 2 seconds Bell);

3: Before replacing the new battery, press the power switch on the base, install the new battery, replace the battery cover, and then press the power button again.

Product name: automatic sensor soap dispenser

Product model: GM-S1805C

Product size: 70 x 94 x 188mm

Product capacity: 200ml

Product color: black spray

Product net weight: 166g

Product material: ABS + PC

Waterproof rating: IPX6 / IPX7

Rated voltage: DC / 6V (1.5V x 4) Delivery does not include batteries

Color packaging: 79 x 79 x 188mm

Set weight: 219g / set

Please allow a slight deviation in the measurement data and make sure you do not mind before ordering.

High quality store for you!

Shop Tips:

1. The size is measured manually, please allow the error (1-3 cm).

2. Due to the different pixels of the monitor, there may be some color difference, please refer to the actual product.