Automatic smart infrared sensor for hot and cold induction faucet, water-saving treasure.

Product Size: 41 mm (L) × 41 mm (W) × 79 mm (H)

Operating Voltage: DC 3.2 ~ 4.1V.

Power Consumption: Static power consumption ≤0.2mW.

Battery Specifications:

1. 3.7V Nominal Voltage Lithium Battery

2. Battery Capacity: 500mAh

3. Charging Voltage: 5V / 1A

4. Micro USB charging port

Working water pressure: 0.05Mpa ~ 0.8Mpa

Working water temperature: ≤75 ℃

Tap adapter with M24 inner and M22 outer threads

Fast induction: Dual induction technology responds with a 0.1-second wave

Spatial induction: Avoids touching and polluting, promoting health and hygiene

Integrated flow channel restrictor design: Eliminates waste and saves water

Long battery life for greater peace of mind: 9 months of continuous use on a single charge

Spatial induction, avoids touching and polluting, more hygienic

No need to repeatedly change and touch the tap in various water situations such as washing Handwashing, washing dishes, washing vegetables, and receiving water can effectively prevent cross-contamination of bacteria and protect the family's health. Tips: 1. This product can be installed on faucets with high legs/high curved surfaces, and the distance between the original faucet spout and the countertop must be ≥25 cm. 2. This product is not suitable for installation on pull-down faucets, dishwashing faucets, or sink faucets where the spout is very close to the countertop. 3. Caution! Do not install the induction water-saving device on instant heating equipment such as electric faucets to avoid malfunctions! 4. Products must be tested with water before leaving the factory. Some products may have a little water residue, which is not a quality issue, so please feel confident in your purchase. Note: The data is measured manually; please allow for a 1-68cm error. Due to differences in lighting and screen settings, there may be some color variation; the actual product received should be considered the definitive version.