Automatic Stainless Steel Soap Dispenser with Waterproof Base, Infrared Motion Sensor and Adjustable Switch

Specifications:

Material: 304 stainless steel

Dispenser capacity: 250ml

Power supply: 4 AAA batteries (not included)

Operation:

1. Insert 4 new 1.5V AAA batteries into the bottom battery compartment.

2. Open the container lid counterclockwise and fill with liquid soap. Do not overfill. Ensure the soap does not contain solid particles to prevent clogging.

3. Press the button. The red power indicator light will illuminate, indicating that the soap dispenser is on. Press and hold the button for 3 seconds until the power indicator light turns off, indicating that the soap dispenser is off.

4. 3 volume levels to adjust the amount of soap dispensed.

Press the button once, the indicator light will flash once, and the liquid flow is low; press the button twice, the indicator light will flash twice, and the liquid flow is medium; press the button three times, the indicator light will flash three times, and the liquid flow is high.

5. Place your hand under the sensor, and the soap dispenser will automatically begin to operate.

ATTENTIONS:

1. When the liquid level is low, it is necessary to add liquid soap immediately; otherwise, the hand soap will not flow.

2. Do not mix water with the liquid soap, as this will affect the dispenser's operation.

3. If you are not using the machine for an extended period, turn off the power switch and remove the batteries.

4. Please do not tilt the dispenser to avoid liquid soap leakage.

5. Do not rinse the dispenser body with water. Otherwise, the product will be damaged. Package Contents: 1 x Automatic Soap Dispenser (batteries not included)