Automatic Stainless Steel Soap Dispenser with Waterproof Base, Infrared Motion Sensor and Adjustable Switch

General Description The automatic stainless steel soap dispenser is designed to offer a hygienic and convenient handwashing solution. Thanks to its infrared motion sensor, it allows for touchless soap dispensing, thus reducing the risk of contamination. Its waterproof base ensures safe use in humid environments. Technical Specifications Material: 304 stainless steel Dispenser capacity: 250 ml Power supply: 4 AAA batteries (not included) Installation Insert 4 new 1.5V "AAA" batteries into the lower battery compartment. Open the container lid counterclockwise and fill with liquid soap, being careful not to overfill. Ensure the soap does not contain any solid particles to prevent clogging. Operation Press the button to turn on the dispenser; the red power indicator light will illuminate. To turn off, press and hold the button for 3 seconds until the light goes out. Choose from 3 volume levels to adjust the amount of soap dispensed: press once for a low flow, twice for a medium flow, and three times for a high flow. Place your hand under the sensor to activate the dispenser automatically. When the liquid level is low, immediately add liquid soap. Do not mix water with the liquid soap, as this may affect the dispenser's operation. If the dispenser will not be used for an extended period, turn it off and remove the batteries. Avoid tilting the dispenser body to prevent soap leakage. Do not rinse the dispenser body with water to avoid damaging the product. Other information: Package contents: 1 x Automatic soap dispenser (batteries not included)