Automatic valve for swimming pool and tank – Float valve with integrated side inlet, Ø20 mm
You may also like
Compare with similar items
Product information
Description
General Description: The pool level controller is an automatic float valve designed to maintain water levels in various systems such as swimming pools, tanks, and toilets. Its patented design allows for fully automatic control without requiring a power supply, thus offering a sustainable and environmentally friendly solution. Technical Specifications Estimated Flow Rate: Up to 40 psi (3 gallons per minute) and 60 psi (5 gallons per minute) Operating Pressure Range: 1 to 12 kg Applicable Average Temperature: 0-100°C Average High Temperature: 10°C to 70°C Materials: Food-grade plastic, 304 stainless steel, nylon, and rubber Inlet/Outlet Diameter: 1/2" BSP male thread Installation Secure the water supply hose to a horizontal surface. Connect the automatic water level control valve to the water supply according to the standard. Ensure the float is vertical after installation. If installed from the top, an elbow is required for the connection. Clean impurities from the hose before installation to prevent blockages. Operation The shut-off valve must be fully open during operation. If two valves are installed in the same tank, they must be maintained at the same level. In case of poor water quality, regular valve maintenance is recommended. If the weather Adding water takes longer; it is advisable to refill and rinse the water inlet. Other information: The color of the item may vary depending on your computer's display and brightness settings. Due to manual measurement, there may be a deviation of 0.1 to 2 cm.
Features
- BrandOTHERS
- MaterialTwo-material
- ColourBlack
- Pcs per pack1
- ManoMano ReferenceME213380252
Pool maintenance products buying guide
'/%3E%3C/svg%3E)
'/%3E%3C/svg%3E){kind=small}