Automatic Water Level Controller, Liquid Level Sensor without AC100 to 260 V XKC C352 3P for Tank Water.

Specification:

Item Type: Automatic Water Level Controller
Material: ABS
Model: XKC C352 3P (Fully automatic water level control and inlet/overflow detection)
Input Voltage: AC100V to 260V, 50 or 60Hz
Working Current: Working current ≤ 110mA, Static current consumption ≤ 20mA
Power Rating:
Resistive loads up to 1.6kW (overload or three-phase loads require an AC contactor)
Inductive loads less than 1kW (overload or three-phase loads require additional AC contactors) Inductive loads are loads with inductive coils, such as motors, solenoids, solenoid valves, etc.
Alarm Output: 800W (resistive) normally open or normally closed output
Output Mode: Normally open or normally closed output
Input Signal: Inductive signal input
Induction Head Interface Voltage: DC12V
Operating Temperature: -20 to 105℃
Size: Approx. 115 x 90 x 40 mm / 4.53 x 3.54 x 1.57 inches



Package List:
1 x Automatic Water Level Controller
1 x Screwdriver


How to Use:
Direct Installation and Use

Note:
If you are not handy and not very good with electricity, please do not buy this controller, as it requires some skills in electrical engineering.