Automatic watering system, low-noise digital programmable water timer, drip irrigation kit for 6 potted plants

Features: 1. LOW NOISE: This automatic watering system features a quiet timer controller with a low noise level of approximately 30 decibels at 1 meter/3.3 feet, ensuring no interference with the automatic watering process and preventing any disturbance to your rest. 2. BUILT-IN WATER PUMP: This automatic drip irrigation kit includes a built-in water pump, eliminating the need for water pressure and allowing for unlimited watering. No fixed tap restrictions mean you can water wherever you want – incredibly convenient. 3. LONG BATTERY LIFE: The water timer has a built-in 1800mAh high-capacity battery for extended use. It helps you care for your plants on weekdays and holidays, even when you're away. 4. EASY TO USE: The digital water timer features a simple control panel with an LCD screen for easy operation and setup. Suitable for indoor potted plants, greenhouse plants, etc. 5. TIME SETTING: 100 timer combinations to meet your different watering needs. Watering time: 10, 20, 30, 40, 50 seconds. 1, 2, 3, 4, 5 minutes. Interval: 1, 2, 4, 8, 12 hours. 1, 2, 3, 4, 5 days. Specifications: Item Type: Automatic Watering System Material: ABS, PC Rated Voltage: DC3.7V Body Size: Approx. 62 x 36 x 80 mm / 2.4 x 1.4 x 3.1 inches Operating pressure: 30 PSI Battery: 3.7V 1800mAh lithium-ion battery (included) Flow rate: 0.8 L/min Suction height: ≥1.5 m / 4.9 ft Head: ≥2.5 m / 8.2 ft Hose length: approx. 5 m / 16.4 ft Gross weight: approx. 408 g / 14.4 oz How to use: 1. Cut a suitable length of hose as the inlet hose and install a filter at one end; 2. Install the inlet hose at the bottom inlet of the unit; 3. Insert a spring clamp at one end of the outlet hose to prevent the outlet hose from falling off due to high water pressure; 4. Attach the outlet hose to the lower outlet of the device and adjust the position of the spring clamp. 5. Install a tee fitting according to the position of the potted plant, ensuring it is securely in place. 6. Install a drip tip or an adjustable drip tip according to the position of the potted plant. 7. Lay the device flat or hang it using hooks or string. 8. Turn on the device and set the watering time (10 seconds, 20 seconds, 30 seconds, 40 seconds, 50 seconds, 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes) and the interval (1 hour, 2 hours, 4 hours, 8 hours, 12 hours, 1 day, 2 days, 3 days, 4 days, 5 days) according to your needs. Package List: 1 x Host Controller, 1 x Hook, 1 x Hose, 1 x Spring Clamp, 1 x Filter Head, 6 x T-Joints, 6 x Drip Arrow Tips, 1 x User Manual, 1 x Connection Cable. Note: 1. Avoid placing the bonsai below the water source to prevent a siphoning effect that could cause water to flow directly into the flowerpot. 2. Manual measurement, please allow for some errors.