1/5
Automotive Fuel Injector Tester, Portable Injector Tester for Car Repair for Automotive Workshop Garage.
Of which environmental contribution £0.10 including VAT.
Sold by Cuizi
Product information
Description
1. Professionally designed, it can diagnose injector problems and you can use it on each injector to individually test for blockages, leaks, or burns.
2. Compact structure; it uses a 12V car battery as its power source, which is very convenient.
3. Four types of pulse modes; in continuous operation mode, it can help determine if the injector is functioning correctly when the engine is off.
4. Lock mode; it supports lock testing to ensure consistent test conditions.
5. With a wide range of applications, it can be used with any fuel pressure tester.
Specification:
Item Type: Fuel Injector Tester.
Power Supply: 12V Car Battery
Operating Environment: 0°C-40°C, relative humidity. Storage Environment: -20°C-50°C, relative humidity. Description of the 4 Modes:
Method 1: The tester emits 1 pulse with a pulse width of approximately 250 ms.
Method 2: The tester emits 50 pulses, and the pulse width of each pulse is approximately 7 ms.
Mode 3: The tester emits 100 pulses, and the pulse width of each pulse is approximately 3.5 ms.
Method 4: The tester continuously emits pulses at a A rate of 50 pulses per approximately 1450 ms.
The pulse width of each pulse is approximately 7 ms.
Package list:
1 x Fuel injector tester
1 x Manual
2. Compact structure; it uses a 12V car battery as its power source, which is very convenient.
3. Four types of pulse modes; in continuous operation mode, it can help determine if the injector is functioning correctly when the engine is off.
4. Lock mode; it supports lock testing to ensure consistent test conditions.
5. With a wide range of applications, it can be used with any fuel pressure tester.
Specification:
Item Type: Fuel Injector Tester.
Power Supply: 12V Car Battery
Operating Environment: 0°C-40°C, relative humidity. Storage Environment: -20°C-50°C, relative humidity. Description of the 4 Modes:
Method 1: The tester emits 1 pulse with a pulse width of approximately 250 ms.
Method 2: The tester emits 50 pulses, and the pulse width of each pulse is approximately 7 ms.
Mode 3: The tester emits 100 pulses, and the pulse width of each pulse is approximately 3.5 ms.
Method 4: The tester continuously emits pulses at a A rate of 50 pulses per approximately 1450 ms.
The pulse width of each pulse is approximately 7 ms.
Package list:
1 x Fuel injector tester
1 x Manual
Features
- BrandOTHERS
- Length150 mm
- Width150 mm
- Height35 cm
- Weight2 kg
You are here:
'/%3E%3C/svg%3E){kind=small}