Bathroom sealing strip, mold-resistant strip, Adhesive strip for sealing and finishing kitchen, bathroom, and bathtub, transparent (3cm x 5m, 5cm x 5m)

General Description

This bathroom sealing strip is designed to prevent water leaks and mold growth. Made of acrylic, PE, and silicone, it is transparent and available in two widths: 3 cm and 5 cm, with a length of 5 m. This product is ideal for use in kitchens, bathrooms, and around bathtubs. Technical Specifications Package Dimensions: 11 x 10.6 x 8 cm Weight: 360 grams Color: Transparent Material: Acrylic, PE, Silicone Length: 5 m Width: 30 mm (3 cm) and 50 mm (5 cm) Installation Thoroughly clean the surface and ensure it is dry, removing any existing silicone sealant before installation. Measure the length of the area to be sealed to determine the correct length and cut the strips accordingly. Remove the strip, measure the same length as the area, mark the strip with a pencil, and then cut it. Place the strip where you need to seal, continuing to peel the strips until the installation is complete. For best adhesion, maintain an ambient temperature of approximately 25°C (77°F). If the temperature is too low, use a hairdryer to heat the sealant before sealing. Press firmly along the length of the sealant strip to ensure a watertight seal. Keep the area dry for at least 24 hours for best results. Other information