Bathroom Shelves Shower Storage Shelf Mounted Bathroom Wall Mounted Storage Shelf (Black)

Lightweight and Durable: The high-quality iron shelf has exquisite waterproof, rust-proof and anti-corrosion effects to ensure excellent strength and service life. No need to drill for installation: clean and dry walls, make sure there is no dust, grease or wax on the surface. Mark the installation position of the shelf. Peel off the protective film from the sticker and press it for 3-5 seconds at the indicated position for 12-24 hours and prevent the sticker from getting wet. Finish and start using. Easy to disassemble: If you need to adjust the installation position, use a hair dryer to blow the tag for about 30 seconds. Then you can delete it and replace it in another location. Note: The adhesive cannot be reused. Widely Used: A stylish shower shelf with 2 hooks, suitable for bathrooms, toilets, laundry rooms and kitchens that require neat cabinetry. Color: Black Product Parameter Uses: Can be used in the bathroom, the kitchen Material: iron Maximum load: 3 kg Size: 270 * 110 * 50mm Features: </ p>Easy to install: No need to drill, no tools, easy to assemble according to the instructions. A shower holder with 2 hooks can be loaded to easily hold shampoo, shower gel, soap and other toiletries. Waterproof, rustproof and matte area. Adjust the height freely and adjust the installation height according to your needs. Two installation methods: Use self-adhesive installation or use screw hole installation, it's your choice! Super glue, strong adhesive easy to install and remove. Compared with products fixed with glue, it will not leave streaks that are difficult to clean and will not damage the walls. How to install without punching: Clean and dry the walls to ensure that there is no dust, grease or wax on the surface. Mark the installation position of the shelf. Peel off the protective film from the self-adhesive adhesive, press for 3-5 seconds for indicated position and make sure to remove all air bubbles on the adhesive. Install the shower shelf and secure the nuts with a wrench. Leave it for 12-24 hours and prevent the sticker from getting wet. Finish and start using.