Bathroom Water Stop Strip, Foldable Shower Barrier and System, White, 50cm/19in

[High Quality] The threshold or water barrier is made of silicone rubber, which is safe, soft, resistant to high temperatures and wear. It has no unpleasant odors and a smooth, easy-to-clean surface. Save time cleaning your kitchen. Easy to remove, leaving no adhesive residue.

[Easy to Use] Cut the flexible silicone strip to the required length, remove the pre-adhesive backing, and install the shower water barrier in the marked position. The edge of the silicone water barrier should be sealed with glass adhesive. Allow it to dry completely and avoid contact with water for at least 24 hours.

[Sizes] Barrier dimensions: width: 1.6 cm (0.63 in); height: 3 cm (1.18 in).

A variety of sizes are available; you can measure the approximate size required before placing an order to avoid under-ordering or waste.

[Good Function] The shower threshold for the bathroom provides good protection, keeps water inside the shower stall, prevents water overflow, and eliminates worries about water damage. It can be applied to flat, smooth tiles, glass, or ceramic, and works perfectly on the outer edge of the shower tray and shower base.

Size: 50cm/19in | colour: White

Package includes:

1 x Water Barrier

Features:

Material: Silicone

Length: 50cm, White

Height: 3cm (1.18 inch)

Width: 1.6cm (0.63 inch)

Functionality:

1. The long, flexible design creates all kinds of shapes.

2. The shower barrier and retention system keep water inside the threshold.

3. Ideal for curbless showers and other areas where water needs to be contained.

How to use:

1. Wipe away water and dust from the floor.

2. Determine the position of the water retention strip and mark it on the floor with a marker.

3. Remove the adhesive and install the water barrier in the marked position.

4. Seal the rubber strip where the two ends of the water retention strip meet the wall.

5. Apply glue to both sides of the water barrier and spread it evenly.

6. Allow to dry and prevent contact with water for at least 24 hours.

Note:

1. Please allow a 1-2 cm error due to manual measurement. Please make sure you do not mind before bidding.