Battery Tester, Battery Tester Monitor, A300 Digital Car Battery Tester LCD Battery Test Analyzer Auto Test Diagnostic Tools (purple)

1. Test and analyze the battery charging system, indicating the battery's condition, including battery life percentage, CCA, battery voltage, and battery resistance.
2. Continuous testing with battery power ensures no battery damage. Reverse polarity and overvoltage protection make it ultra-safe.
3. A full range of CCA tests (100-1700) provides reliable and accurate operation for larger batteries.
4. Excellent compatibility with most 12-volt battery types (including flood, AGM, gel, and deep cycle batteries), operating quickly and accurately.
5. Comes with a large LED display and a robust clamp. The audible reminder function makes it more durable and reliable.
6. With a compact shape, stable performance, shockproof, lightweight and portable, it doesn't take up much space and you can put it anywhere.

Specification:

Item Type: Battery Tester.
Material: ABS
Color: As shown in the picture
Height Size: Approx. 13x6.2x2.8 cm / 5.1x2.4x1.1 inches
Weight: about 261g/9.2oz
Input Voltage: DC12V
Test Elements: Voltage, Resistance, CCA, Battery Status
Applicable Object: 12V Battery
Wide Operating Range:
ACC: 100-1700
DIN: 100-1000
IEC: 100-1000
FR: 100-1700
Battery Capacity Percentage:
80% - 100% Good Condition
60% - 80% OK, Not Bad
40% - 60% Need Attention
0% - 40% Bad, Needs Exchange
How to Use
1. The analyzer is powered by the vehicle's battery. For testing purposes, the analyzer clamps must be securely attached to the battery. (The red clamp indicates the positive terminal and the black clamp indicates the negative terminal, which must be attached accordingly to the battery terminals.
2. Power On and Enter
a. Press the power button for 1 second.
b. The display illuminates and the Bee alarm sounds a "B".
The display shows the moving digits, all test indices, and the low battery warning index.
c. Press "OK" to enter the CCA (Cold Cranking Ampere) value entry step.
d. The third digit to the right of the four-digit index flashes; this means the reference digit can be changed using the UP (increase) or DOWN (decrease) function button. Press the UP (increase) or DOWN (decrease) function button until the correct digit is displayed and move to the next digit to enter the value by pressing "SEL".
e. The units digit to the right, if the The four-digit number increments by 5 units each time; subsequent digits are incremented by one unit.
F. Once the input steps are complete, press "OK." The analyzer will begin test mode for 10 seconds.
The Bee alarm will continue to emit "Be" sounds when test mode is closed. Press any button to stop the "Be" sounds.
If the battery voltage is too low, the "low" sign in the bottom left corner of the screen will flash. Please recharge the battery and test again.

Package List:

1 x Battery Tester

1 x Instruction Manual.

Note:

1. Please allow 1-2 inch error due to manual measurement. Thank you for your understanding. 2. Monitors are not calibrated to Similarly, the color of the item shown in the photos may be slightly different from the actual object. Please consider the actual item as the standard.