Bending machine and press. Refrigerant line bending tool for air conditioning, brake, and fuel systems. 1/8", 3/16", 1/4", blue. Bending machine and press.

Features: 1. Can be bent without twisting or collapsing; the calibration mark on the pipe bender indicates bend angles from 45° to 90°. 2. Lightweight and portable design; more convenient and faster to use, saving time and effort. 3. Suitable for small tubes of 1/8 inch (3 mm), 3/16 inch (4 mm), and 1/4 inch (6 mm). 4. Suitable for automotive fuel lines and air conditioning refrigerant lines. It is also suitable for bending round copper, aluminum, and copper tubing. 5, treated with high-quality aluminum alloy materials, wear-resistant, high-temperature resistant, and with a long service life.

Specification

Item Type: Tube Bender

Material: Aluminum Alloy

Color: Blue

Bending Radius: 0-120°

Reference Mark: 45-90°

Application: Suitable for small 1/8 inch (3 mm), 3/16 inch (4 mm), 1/4 inch (6 mm) pipes, such as automotive fuel lines and air conditioning refrigerant lines. It is also suitable for bending round copper tubing, aluminum tubing, and copper pipes.

Instructions for Use:

1. Lift the handle of the pipe bender and position the pipe in the appropriate channel size. Ensure the top surface of the pipe is in contact with the support (Fig. 1).

2. Mark the pipe where you need the bend, ensuring the "0" on the handle is aligned with the "o". Slowly lower the handle until the "o" aligns with the desired angle (Fig. 2 shows the position for a 45-degree angle, Fig. 3 shows a 90-degree angle).

3. If you need the bend to the left of the marked position, align the mark on the pipe with the "L" and repeat the movement required to bend the pipe. To the right of the mark, position the mark on the pipe on "R"

Package List

1 x Pipe Bender