BFT Mitto B RCB02 remote control replaced by MITTO COOL C2

General Description: Original BFT MITTO B RCB02 R1 remote control, ideal for automating gates, garages, or barriers. This 2-channel model operates on a frequency of 433.92 MHz and uses a rolling code security system to prevent cloning. The duplication procedure is simple and must be performed near the receiver. Technical Specifications Number of channels: 2 Frequency: 433.92 MHz Encoding type: Rolling Code Power supply: 12V with 23A type battery (included) Range: 50-100 m Dimensions: 62x38x14 mm Compatibility and accessories Compatible with BFT automation systems Kit contents: 1 remote control, 1 23A battery, 1 instruction manual Installation The remote control is easily programmed by following these steps: Press buttons 1 and 2 on the source remote control simultaneously until the LED lights up. Press the button on the source remote control. Within 10 seconds, press buttons 1 and 2 on the new remote control simultaneously until the LED lights up. Press the button on the new remote control to complete the programming. Wait at least 10 seconds before attempting to open the door. The gate with the new remote control. Use: This remote control allows you to easily open and close your gate, garage, or barrier. To duplicate other remote controls, repeat the previous procedure. Other information: 24-month warranty. If programming fails, wait 20 seconds and restart the procedure. In older versions of Mitto, a hidden button can be used instead of buttons 1 and 2.