(Black, 100 cm) Silicone shower backsplash, self-adhesive anti-spill shower threshold strip, shower barrier, shower threshold barrier, foldable shower backsplash for bathroom floor

[Helpful Tips] 1. Once the shower screen is installed, it is recommended to apply silicone sealant evenly to the edge (this product does not contain silicone sealant) to make the shower screen more durable and waterproof. 2. Once the shower diverter is installed, it must be left for 30 hours. Do not allow water to flow through the damp-retaining strip. Wait for the silicone sealant to harden before using it. [Multifunctional] Our shower barrier can be installed on the sink floor, the outer edge of the countertop, and the gap between the countertop and the wall to solve the problem of debris entering the gap (1-10mm) and water leaks. It prevents drips, leaks, and separates wet and dry materials on countertops. (The shower diverter is only 18mm high, so it won't cause any problems on the countertop and is easy to move.) 【Applicable to multiple scenes】The folding shower screen is suitable for all smooth floors and countertops, such as kitchen counters, sinks, bathroom doors, bathroom corners, bathtub edges, sinks, window sills, balconies, around washing machines, washing machine bottoms, etc. The toilet creates a spill-proof barrier that effectively repels water, keeping floors and countertops clean and tidy. [High-Quality Silicone Material] The shower seat is made of environmentally friendly elastic silicone with a soft and smooth surface. The silicone material is waterproof and mold-resistant, easy to clean, difficult to discolor, stain, or deform, and is heat and mold resistant. It is also frost-resistant and suitable for all seasons. The shower seat and fixing system are equipped with an adhesive backing that provides strong adhesion and does not easily fall off. Easy to install: When installing the shower screen, the work surface must be free of water and dust, otherwise the adhesive's bonding effect will be affected. You can use a knife to cut the required length, then tear off the adhesive strip and stick it on (when the shower screen needs to be bent, it is recommended to first cut it at 45 degrees, then cut it at 96 degrees for splicing. It is more stable and durable).