Black magnetic cat bed, size L, with swing door and 4 locking mechanisms, for cats, kittens and puppies

Available options: Color: Black and white

Safe and neat: The transparent door allows pets to see through it. External rain seal for waterproofing. The brush bar eliminates the noise of the door slamming. The 4-way smart door control gives cats maximum freedom. The interior edges of the structure are polished and chrome-plated for durability.

4 opening modes: The swing door can be customized with 4 opening modes: outward, inward, outward, and fully closed.

Give your cat all the freedom you want.

EASY INSTALLATION: The nails and pads included in the set can be easily installed on windows, doors, cabinets, panels, walls, and more.

Superior Quality: Made of weather-resistant ABS material with a smooth and durable finish.

Product Size: Exterior Door Frame Size, Interior Door Frame Size

S: 19*19.7*2cm, 16*15.7cm

M: 19*19.7*5.3cm, 16*15.7cm

L: 25*23.5*5.3cm, 19*18cm

Installation Notes

Draw the outline on the whiteboard, draw the cat petal frame on the cardboard, and cut it out.

Note: It is best to prepare these necessary tools first: pencil, ruler, chainsaw, drill bit, screwdriver, double-sided adhesive tape. Outline the door: Use a pencil to trace the outline of the cutout on the door to be glued. Note: Generally, the average installation height is about 10 to 15 cm from the floor. Drill the 4 corner holes: First, drill the holes completely in the 4 corners with a power drill. Drill holes in the tunnels: Use the chainsaw to cut holes in the tunnels from the drilled holes. Place the cat flap on the door, and after cutting the tunnel hole, it is best to cover it with a layer of wood veneer. This is definitely necessary if your holes are cut a little too large. Reduce the tunnel depth if necessary. If the cat flap is too thick for your door, use a screwdriver or utility knife to cut part of the tunnel along lines A or B. Cut 2-4 cm from the door. Attach the cat flap to the door with double-sided tape. Eight screws are provided; tighten both sides with a screwdriver. NOTE: The eight screws are designed to fit; they are not short. Finish! Place the nut over the screw hole and tighten it. Installation is complete.