BNC pH probe for swimming pool water analysis – pH range 0-14 – 300 cm cable – BNC pH tester connector

Overview The BNC replacement pH probe is designed for accurate measurements in the pH range of 0 to 14. Equipped with a 100 cm cable, it is ideal for various applications such as aquariums, hydroponics, plants, swimming pools and spas. The probe is equipped with a BNC connector for easy connection to pH controllers or test instruments.

Technical Specifications

Detectable Concentration Range: pH 0-14

Detection Temperature Range: 0-80 °C

Response Time: ≤ 5 seconds

Preparation Time: ≤ 60 seconds

Heating Voltage: 5 ± 0.2 V (AC/DC)

Operating Current: 5-10 mA

Operating Temperature: -10 to 50 °C (Nominal Temperature: 20 °C)

Humidity: 95% RH (Nominal Humidity: 65% RH)

Module Dimensions: 42 mm × 32 mm × 20 mm

Output: Analog voltage signal

Mounting: 4 M3 mounting holes

Applications: For optimal use of the probe, please follow these steps:

Remove the protective cap from the electrode before testing.

Ensure the sensitive bulb is filled with liquid.

If air bubbles are present, gently shake the electrode to remove them. Connect the electrode to the pH meter and calibrate it according to the instructions. After use, rinse the electrode with distilled water and store it in its protective bottle. Other information: Operating conditions: ambient temperature 5 to 40 °C, relative humidity ≤ 85%. To maintain electrode performance, clean it regularly and avoid contact with hard objects. After prolonged use, it may be necessary to regenerate the electrode by soaking it in a suitable solution.