Boost Pump, Automatic Booster Pump for Water Heaters, Small 24V DC Water Pump

General Description

The 24V DC automatic water booster pump is a small, quiet water pump designed to boost water in domestic systems, including solar water heaters, showers, and pipelines. It offers a flow rate of 15L/min and a delivery head of 18M, with a boost pressure of 65Pa, ensuring stable and reliable water pressure. Its automatic operation is controlled by the water flow, making it convenient and energy-efficient.

Features

• Automatic Operation Controlled by Water Flow: The pump's opening and closing are automatically controlled by the water flow. When you open/close your faucet, the pump starts/stops automatically. Be sure to open the faucet before starting the pump to ensure water flow inside.
• Multi-System Compatibility: Can be used with tankless or tankless water heaters. Maximum flow rates of 15L/min and a maximum delivery head of 18M.
• Water Level Protection: When the water level at the pump inlet is low, the pump automatically shuts off for protection.
• Low Noise: Designed to operate quietly, providing a peaceful user experience.

Specifications

• Operating Voltage: 24V
• Power Supply: 100-240V European
• Insulation Class: Class H
• Protection Rating: IP56
• Boost Pressure: 65Pa
• Start-up Mode: Automatic control by water flow
• Flow Rate: 15L/min
• Heading Height: 18M
• Inner Diameter of the Connection: 15mm
• Area Temperature: 2-65°C

List Packaging

• 1 * Pump
• 1 * Power Adapter
• 1 * Water Hose
• 1 * User Manual
• 1 * Hanging Hook

Usage and Precautions

• Usage:
  1. Install the pump directly according to the instructions.
  2. Open the tap before starting the pump to ensure water flow.
• Precautions:
  • The water flow tap integrated into the pump requires a minimum water flow of 1.5 L/min to open the valve and start the pump. If the water flow tap cannot open, unplug the pump for 3-5 seconds and reconnect it. The pump will start by force for 10 seconds.
  • If the pump runs for 10 seconds after connection and then stops automatically, this indicates that the water flow tap is not open.
  • Test Method: Take a mineral water bottle and fill it with water. Typically, a mineral water bottle holds 500 ml, and you can install and use approximately 3 bottles per minute.
  • Ensure the pump is properly installed and maintained to guarantee its proper operation and longevity.