Brass pressure reducing valves for electric water heaters for water heating systems - Brass replacement part 0.9 MPa

Made of brass, it has a high density, is strong and durable, and has high resistance to mechanical damage and wear.

These valves can be used in houses, apartments, and most commercial settings in fields such as industry, plumbing, and heating.

If, however, the pressure in the boiler rises above the set value during water heating for any reason, the water heater's pressure relief valves will release the required water, preventing serious disruptions and dangerous overpressure.

The dimensions are a 1.27 cm male thread and a 1.27 cm female thread. The brass valves automatically release excess pressure, preventing water heater explosions.

Our brass valves function as both check valves and pressure relief valves.

On the one hand, it's a check valve that prevents hot water from flowing back from the boiler into the cold water circuit.

Specifications: Material: Brass. Maximum pressure: 0.7 MPa/0.75 MPa/0.8 MPa/0.85 MPa/0.9 MPa (optional). Operating temperature: -20°C ≤ T ≤ 110°C. Dimensions: 1/2" external thread and 1/2" internal thread. Length: Approximately 44 mm.

Package contents: 1 pressure relief valve.

Note: Please allow 1-2 cm error due to manual measurement. Please make sure you do not mind before you bid. The actual color of the item may vary slightly from the image due to differences in monitor settings and lighting.