Brass solenoid valve, 3/4" 220V AC, electric solenoid valve, direct control for water and air, moisture resistant

High-quality materials: The steam magnetic valve has a high-quality brass body, which is durable, rust-resistant, and resistant to temperature and pressure. The nominal diameter is a 3/4" (NPT) internal thread. The valve body is made of a high-quality copper coil, resistant to heat and deformation. The solenoid valve is made of 100% brass and operates accurately and reliably. It is moisture-resistant and can be used outdoors. Product parameters of the pilot steam solenoid valve: Protection rating: IP65, Rated voltage: AC 220V, Operating current: 2.3A, Power: 15W, Operating pressure range: 0-1.0 MPa, Operating temperature: -5-150°C, Tube diameter: G3/4, Flow opening: 20mm, Type: Closed, non-current (N/C). The valve features a high-performance, corrosion-resistant Teflon rubber seal. The direct-acting brass solenoid valve operates quickly and efficiently. It opens and closes the water flow immediately. whether it is open or closed. This allows for convenient and efficient control. The opening switch closes when the power is off. The valve should not be continuously switched on for more than 8 hours. Otherwise, the coil may burn out and the valve will not function correctly. Maximum flow rate - NPT thread: The 3/4" brass thread conforms to the national pipe thread standard and is highly compatible. The spherical through-hole head with a 3/4" internal bore ensures unimpeded fluid flow. Thanks to its maximum flow rate, it is ideal for home and industrial automation projects. Please note that installation must be carried out in the direction of the media's flow. To seal the NPT thread, we recommend using PTFE tape. It is recommended to install the solenoid valve horizontally with the coil vertically upwards. Wide range of applications: The pneumatic solenoid valve is suitable for steam, water, gasoline, diesel, kerosene, and low-viscosity corrosive liquids (viscosity < CST50). It is used in steam engines, irrigation system flow control, water treatment, steam plants, and the water industry. Can be used with gasoline, diesel, kerosene, natural gas, air, etc.