BSIDE G1 Combustible Gas Detector - Room Temperature - Natural Methane - Propane - Gasoline Leak Tester

Features:1.The round cutting head at the end of the T-bar is equipped with three high-quality carbide wheels that can cut thicknesses from 2 to 8 mm.
2.This band cutter is used to cut strips from 3 cm to 30 cm wide, saving you time and effort.
3.Most importantly, all your artwork will be exactly the same size, which is very convenient.
4.The round cutter has a 3-point base that stays in place, even on rough-textured art glass.
5. Furthermore, such a cutting system can be used to cut glass between 8 cm and 60 cm in diameter.
Specifications:Item Type: Glass Cutter
How to Cut Strips:
1. Simply nail a standard board to your workbench.
2. Place the edge of the glass against the board.
3. Slide the base of the strip onto the T-bar and use the scale from 1-2-3-4 to set the size of the strip you want to cut.Tighten the screws so the base doesn't move.
4.When you apply continuous pressure while sliding the cutting wheel across the glass, the base of the strip moves along the edge of the board.
How to cut a circle:
1.Place the glass to be cut on the workbench.
2.Slide the seat of the round cutter onto the T-bar.Use the scale starting with 6-8-10-12.Set the size of the circle you want to cut.Tighten the screws so the base doesn't move.
3. Place the round cutting base on the glass to be cut.
4.Hold the pressure button in the center of the circular support with your thumb to secure the support in place.At the same time, continuous pressure is applied while rotating the T-cutting wheel on the glass.
Details of such cutting system:
30CM T-bar: There are two scales on the T-bar. We read the width of the strip to be marked with the bottom of the strip. And this scale starts with 1-2-3-4. While the other scale reads the diameter of the circle to be marked with the base of the circle cutter. And this scale starts with 6-8-10-12. In addition, this round cutter head at the end of the T-bar contains three high-quality carbide wheels which can cut 2-8mm thickness. hours of tedious cutting. Most importantly, all your artwork will be the exact same size.
Circle Cutter Base: The circle cutter has a 3-point base so it will hold its position even on rough textured art glass.And it can mark circles from 8 cm to 60 cm in diameter.

Package list:1 set x cutting tool