BT360 12V 24V 30-2000 CCA Car Battery Tester - System Analyzer for Cars, Motorcycles, Trucks, Boats, and Vehicles

【Battery Voltage Test】 Seamlessly switch between in-vehicle and out-of-vehicle testing to easily monitor battery voltage, capacity, CCA, lifespan, internal resistance, and other parameters, enabling accurate battery power assessment. Multifunctional: The BT360 12V battery load tester includes battery testing, cranking testing, and load testing. Battery Test: Accurately diagnoses SOC, SOH, voltage, CCA, and internal resistance after selecting the correct battery type and CCA/AH values. It can also be switched between up to 14 languages to meet various needs. 【Why Need It?】 The battery tester is primarily used to analyze the battery's health status to calculate the battery's actual cold cranking amps (CCA) and degree of aging, providing reliable analysis results for battery testing and maintenance. It alerts the user in time when the battery needs replacing due to aging. 【Starting Capability Test】The results are clear and intuitive, accurately detecting the starting voltage of the vehicle's battery. 【Efficiency and Safety】This 12V car battery tester uses advanced conductive technology and can directly display highly accurate vehicle information. Equipped with reverse polarity protection, the device will not be damaged or affect the car or battery. 【Wide Compatibility and Applications】The BT360 battery charge tester can test all 12V batteries with a CCA of 100 to 2000, including standard wet batteries, AGM flat plate batteries, AGM spiral batteries, and gel batteries. The test results are based on CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB standards. You can test batteries in a variety of vehicles, including cars, motorcycles, trucks, motorhomes, off-road vehicles, SUVs, boats, yachts, lawnmowers, and even golf carts without having to load the device. Charging system test: Evaluates the charging system's condition to prevent battery failures caused by charging errors and helps assess battery performance. The car battery tester always adheres to independent research and development. The device has a detection range of 8-30V, making it suitable for cars, trucks, motorcycles, and other vehicles. It tests all types of automotive batteries, including AGM, plate, spiral-wound, and gel. Featuring a dot-matrix display, it provides a variety of information on a clear display. Once finished, the system directly displays battery performance results, precise values for capacity and resistance. This allows even beginners to evaluate. Connect V: red clip connected to positive, black clip to negative. Test: First, select test type, then test standard, wait a few seconds to obtain the test report. After selecting start, follow the instructions: start the engine and let it run until it is finished. Once charging, increase the speed to 2500 rpm for 5 seconds, then press the OK button to finish.