Butane Gas Soldering Iron Kit, 12ml Filling Capacity, DIY Soldering Iron Kit
Buying for your business?
Negotiated prices excl. VAT up to -20%
You may also like
Compare with similar items
Product information
Description
Specification: Item Type: Gas Soldering Iron Kit Material: Aluminum Alloy Filling Capacity: 12ml Fuel Used: Butane (Normal Lighter Gas) Temperature: Flame Temperature up to 1300℃, Soldering Iron Temperature up to 450℃ Usage Time: 50-80 minutes 4 Functions: Soldering, Cutting, Flame Spraying, Hot Air Blowing
Gas Filling: 1. Use high-quality butane to fill and ensure the switch is off, then inflate to 0FF. 2. Insert the butane canister into the air hole and press to inflate. 3. Gas filling can be completed in approximately 10 seconds. Wait a few minutes for the gas to stabilize before use. 4. If there is a hissing sound at the tip after gas injection, press the air port with the tip of the soldering iron to eliminate it. Ignition: 1. Replace the soldering iron tip. 2. Push the switch to NO (No) and listen for a hissing sound. 3. Use a lighter or lighter to ignite the soldering iron near the connector. 4. Burn for 3 seconds after ignition. When the flame is extinguished, the soldering iron tip will continue to heat up. 5. Adjust the flame size; the + direction is larger and the - direction is smaller. 6. The flame temperature of this product is as high as 1300℃ (the soldering iron tip temperature is 450℃). Exercise caution during use. After use, turn the switch to the OFF position. 7. When using a gas soldering iron, please take special care to wait until the flame has completely burned away the object in the iron and turned red before using it. The flame size should not be too large to prolong the life of the soldering iron tip.
Features
- BrandOTHERS
- Pcs per pack1
- Welding mask includedNo
- MaterialAluminium
- Welding processFlame
- Power supplyGas
- ManoMano ReferenceME223232876
- MMID362878478781
- Product codeKrlin-27955
'/%3E%3C/svg%3E){kind=small}