BW2000 Full Spectrum LED Grow Light with UV/IR, Dual LED Chip for Greenhouses and Indoor Plants, Vegetables and Flowers, White

BW2000LED Plant Lamp

Specification:

Actual power consumption: 90W-Input voltage:AC100-277V/50-60HzLED-MENGE:288pcs(red,blue,white,purple,orange,UV,IR).Main coverage area:60*60cmAbmessungen:41*20*4cmCleaning ofItems:Weight:1.14kg

• Contents of delivery:
• 1 LED plant lamp BW2000
• 1 stainless steel hanger hook
• 1xadjustable rope
• 1 user manual (French not guaranteed)
• 13m cable

The best choice for full spectrum LED plant lights

High PPFD

PPFD is the photosynthetic photon flux density. Generally: The higher the PPFD value, the better for plant growth. The BW2000-PPFD value is approximately 2886 µmol/m²s at 6 inches high and approximately 1477 µmol/m²s at 12 inches high.

Adjustable Cord

The height of the lamp cord can be adjusted according to the plants' lighting needs. Ensure the plants receive the light they need at different stages of growth to increase the harvest.

Recommended LED Chips

Promotes plant growth, increases bud formation and survival rates. When using a high-quality LED light source, the lifespan is up to 100,000 hours.  

VEG Channel

Hanging Height: 35 to 40 cm

Lighting Time: 10 hours/day

The VEG channel for plants in the germination/seedling phase at the early leaf stage consumes 22W of power for a wavelength range of 370 to 750nm. At this stage, plants react most strongly to blue light.

We recommend hanging the light 35 to 40cm above the plant's canopy and leaving it on for 10 hours a day.

Bloom Channel

Hanging Height: 40 to 45cm

Lighting Time: 18 hours/day

The BLOOM channel for plants in the flowering and fruiting phases consumes 22W of power and uses a range of wavelengths from 620 to 670nm. At this stage, plants react most strongly to red light.

We recommend hanging the light 40 to 45cm above the plant's canopy and leaving it on for 18 hours a day.

VEG+BLOOM channel

Suspension height: 35 to 40cm

Lighting time: 12 hours/day

The VEG+BLOOM channels together emit a maximum of light to support the highest growth performance of plants, from the plant to harvest.

For best results, we recommend turning on both switches during the flowering and fruiting phases.