This car battery charger which can automatically charing the battery based
on the battery status! It uses MCU controller to save and fast recharge
service for your battery!
Constant current mode:
When the battery voltage is lower than the value set by the charger, the
charger works under constant current mode and provide the constant
current for the battery.
Constant voltage mode:
Using Pulse Width Modulation (PWM) to Control the Charge Current Peak
and the charger output voltage which ensures the battery is fully charged
and avoids overcharging.
Floating charge mode:
When the battery voltage approaches the value of the constant
voltage and current mode will cut the current gradually,
that means the battery power is full, then the pilot light will turn green and the
fan will stop working. Charger switches to floating charge mode
automatically in mode. At this time, the battery charge can be stopped or
continue floating charge for half an hour.
Automatic Trickle function
Overload function Anti overvoltage
Power and energy
Short circuit protection
short start function overload
wide voltage range
Charger mode: three-phase (PWM charging mode)
Includes constant current charge phase, constant voltage charge
phase, floating charge phase
Materials: Plastic + Metal
Battery type: AC input storage battery
Applicable battery: 12Ah-100Ah
Charger: 6A / 10A (for optinal)
Supply voltage: 150V-250V
Output voltage: 12V
Nominal frequency: 47-63 Hz
Full charging efficiency: ≥ 87%
Operating temperature: -40 ~ + 95?
Size: 21 * 6.5 * 12cm
Package Weight: 378g
Suitable for car motorcycle
1 X Battery charger (EU standard)
1 X User Manual
Questions & answers
All you need to know about this product from our experts
No questions have been asked (yet). So you can get started as soon as you are ready!