Car battery disconnect switch, power cut-off switch with remote control, 12V 200A automotive copper terminal

Features: 1. Long Range: Remote car battery disconnect system, disables your car's power system with a remote control, control distance of 48.78 m. 2. Convenient and Simple: This remote electromagnetic battery switch allows you to move the trigger from under the hood to your hand. 3. Operating Voltage: 12V remote kill switch, operating voltage range of 11-15V, suitable for most cars, small trucks, agricultural vehicles, etc. 4. Low Power Consumption: The switch consumes 5 mA in standby and approximately 3W when in operation, making it more energy-efficient than new car battery disconnect switches. 5. Stable Performance: The external antenna provides a longer and stronger signal. For battery disconnect only; it cannot start your engine. Default design. Specifications: Item Type: Remote Battery Cut-off Material: ABS, Copper, Silver Battery Model: CR2016 x 1 (Built-in) Battery Capacity: 75mAh Operating Voltage: DC11-15V Rated Current: 120A-200A Starting Current: 200A-360A (less than ten seconds) Standby Current: 0.005A Switch Size: Approx. 45 x 45 x 45 mm / 1.77 x 1.77 x 1.77 inches. Package List: 2 x Remote Controls, 1 x Main Power Switch, 1 x Copper Terminal, 2 x Battery Clips, 1 x Copper Adapter. Note: 1. After installation, when the relay switch is on, battery power consumption will increase. When leaving the car, the main power must be switched off in time using the remote control to avoid power loss due to excessive power consumption and starting failure. 2. Since a power outage will cause the entire car to malfunction, the alarm, on-board computer, etc., please ensure there are no effects after a power outage. 3. When driving normally, do not disconnect the relay switch to avoid increasing the generator voltage and damaging the car's electrical components.