Car Diagnostic Tool, Lexia 3 Full Chip PP2000 Diagnostic Interface V7.83 Auto Diagnostic Tool for All Models

Specification: Material: ABS Package Size: 25*16.5*6cm/9.8*6.5*2.4in Package Weight: Approx. 625g/22oz Function: 1. Read ID Displays the complete ID of the control unit, such as part number, software/hardware version, manufacturer, etc. 2. Read Fault Codes Displays all fault codes with a full description, supports printing reports or copying to the clipboard. 3. Clear Fault Codes This function clears all stored fault codes and other diagnostic information. 4. Auto-scan (full car scan/test) Detects all ECUs (electronic control units) installed in the car and reads all diagnostic fault codes. 5. Measured Values The program displays live data such as engine speed, battery voltage, oxygen sensor readings, coolant temperature, etc. Values can be displayed as a graph, 9 values at a time, or as a complete list (all measured values). Logging to a file is also supported, allowing for offline analysis. 6. Actuator Test: The actuator test activates a particular actuator (such as turning on the fuel pump, locking/unlocking the wheels, locking/unlocking the doors, cutting off the fuel, etc.). 7. Programming/Adaptation Functions: This functionality is of great importance in all vehicle systems such as engine control units, immobilizers, airbags, alarms, body control units, and some others. These systems require you to perform reset or programming procedures after car repair, or even configuration after replacement.