Car flame retardant heat and sound insulation mat 50cmx200cm5mm 5RsB1kgPI9

“Features:

Sound insulation, heat absorption, damping, strong corrosion resistance.

In winter, the engine temperature is high, but the outside temperature is low when driving, making it easy to damage car parts.

Scratch resistant. The surface fabric is fiberglass. Heat resistant, it blocks the transfer of sunlight, engine and heat from the exhaust pipe to the cabin, reducing air conditioning energy consumption and saving fuel.

< p>Slow down the aging of the car paint: Due to the heat, the front cover is directly exposed to sunlight, and the high temperature inside and outside the engine accelerates the aging of the paint of the car.

It can also be used on the roof floor, hood, firewall, chassis, trunk, trunk lid, etc. Do not cover chassis wiring or air holes.

Description: __________:__________:

Size: 10mm 500x2000mm, 50cmx200cm*5mm, two sizes are available

This fantastic product will keep the interior of your vehicle cool and quiet - it's easy to install and prevents unwanted heat and noise, it works great, and if you put it on the door it will make a sound solid modern when closed. Can be used for floors, firewalls, door panels, trunks, roofs and all interior areas requiring thermal insulation.

Material: aluminum fiber and cotton for muffler.

Powder-free and excellent vibration resistance

Excellent sound absorption performance

< p>Does not cause metallic corrosion

Very clean, does not absorb odors, odorless.

Easy to install and suitable for all types of vehicles.

Self-adhesive, waterproof and dustproof backing.

Note:

Do not apply directly to a heat source, including hot exhaust pipes, mufflers, or turbine pipes.

Compression will cause volume reduction, but it won't affect use, and if you care, you can purchase a thicker one depending on your needs.

Installation Instructions:

1. Please clean the surface to be pasted.

2. Make the insulating material and sheet metal fit tightly to exert the best grip and cushioning performance.

3. Do not cover chassis wiring or air holes during installation.

4. The correct use of the tape will improve the connection effect.

5. The soundproof/damping aluminum plate is in a paste, which can be heated with a hair dryer to make it flexible, then compacted by hand. If the room temperature is below 5 degrees Celsius, heat it first with a solar lamp until it is flexible. Then peel off the wax paper and glue it together.

6. It is best not to tear the paste repeatedly after successful installation, and the effect of the paste will not be damaged.

7. Additional insulating material may stick in hidden places.

8. A simple door installation is unlikely to impact hearing, it requires a full structure.

9. Suitable for door, roof, floor, hood, firewall, chassis, trunk, trunk lid, etc.

Package includes:

1 x heat shield mat