Car GPS Signal Antenna Amplifier with 30DB Receiver + Transmitter for Phone Navigation

Function:1.1.Uses dedicated filters for efficient signal transmission and high accuracy.
2.2.It adopts a dual-stage LNA amplifier, which has good signal strength and supports multiple devices simultaneously.High-speed input is 1575 to 1602 MHz.
3.3.USB port GPS receiver.Can be used with smartphones, laptops, desktop computers, tablet PCs, etc.
4.4.Easy installation. Simple operation, simply plug in the appropriate interface and turn on the power.
5.5.With magnetic mounting base.
Specification:The antennas contain a high-performance GPS patch antenna and a high-tech, low-noise amplifier; providing excellent signal amplification and out-of-band rejection for the receiver.
Features:
1.Uses dedicated filters for efficient signal transmission and high accuracy.
2.It adopts a dual-stage LNA amplifier, which has good signal strength and supports multiple devices simultaneously.High-speed input is 1575 to 1602 MHz.
3. USB port GPS receiver.Can be used with smartphones, laptops, desktop computers, tablet PCs, etc.
4.Easy installation.Simple operation: just plug in the corresponding interface and turn on the power.
5.With magnetic mounting base.
Specifications:
Center Frequency: 1575.42 MHz ± 1 MHz
Bandwidth (MHz): 10 MHz
Input Impedance (Ω): 50
V.S.W.R: ≤ 1.5
Power Consumption: Bias Current: R.H.C.P
Supply Voltage: DC 3.3 ~ 5.0 V
Sound Coefficient: ≤ 1.5 dB
Axial Ratio: 3 dB
Gain (dBi): 29 dB ± 3 dB (LNA)
Maximum Input Power: (W) 5
VSWE (Output VSWE): ≤ 1.8
Operating Temperature -40℃～+85℃
Storage Temperature -40℃～+90℃
Cable Length approx.5M/15FT (receiver) + 1M/3FT (transmitter)
Package Size: 13 * 13 * 3 cm / 5 * 5 * 1in  
Package Weight: 142 g / 5 oz 
Notes:
Before powering on the product, ensure that the receiver and transmitter are separated by 2 meters.Otherwise, the receiver will not function correctly due to damage caused by self-excitation.
Product Installation and Connection Method
1.Mount the receiver in a location with a good signal outside the car and bring the charger inside the car near the transmitter.
2.Mount the transmitter inside the car and place the navigation system, mobile phone, dongle, and other devices relatively close for optimal signal reception.
3.Connect the male output of the GPS receiver to the female output of the transmitter and verify the correct wiring. It can be turned on.
 
Package List:
1 * Antenna Transmitter
1 * Receiver
2 * Adhesive Stickers
 
Package List:1 * Antenna Transmitter
1 * Receiver
2 * Adhesive Stickers