Car OPCOM 2012V Can OBD2 Oper Firmware V1.99 USB Interface Diagnostic Tester Black

Interface Diagnostic Tester, Auto OPCOM 2012V Can OBD2 Oper Firmware V1.99, USB, Black Functions: Provides complete status information (current, absent, intermittent); You can print, save, or copy error codes to any other application; From the error code menu, you can directly access the measurement block menu. Display error information from multiple control modules. Can display 8 measurement parameters simultaneously; The sampling rate largely depends on the communication protocol. 1. Covers almost all Opel vehicles, even new cars with CAN-BUS diagnostic function, such as Vectra-C, Astra-H, Zafira-B. 2. The program allows you to read and clear error codes, display real-time data, and perform output tests. 3. The program supports many control units, such as engine, automatic transmission, ABS, airbag, engine cooling module, instrument cluster, electronic air conditioning, body control unit, etc. 4. Since Opel uses multiple pins in the OBD connector, the diagnostic interface acts as a multiplexer and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = serial connection (ISO9141, KW81, KW82, KWP2000). ) 5. The error code is displayed with all available information: Full description of the error code text: 1) Complete information about the status (present, absent, present, flashing) 2) You can print, save, or copy error codes to any other application. From the error code window, you can go directly to the measurement block window. 3) The program displays measurement information from blocks on many control modules, which you can select from the list. 4) The program can display 8 measurement block parameters simultaneously. The sampling rate largely depends on the communication protocol. For example, older systems such as Omega-B-2000 and the latest CAN-based system control unit are very fast! You can also run output tests on multiple controllers. PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN - High-speed two-wire CAN BUS, 500 kbps MSCAN - Medium-speed two-wire CAN BUS, 95 kbps SWCAN - Low-speed one-wire CAN BUS, 33.3 kbps Packing List: 1 pc x COM OP port 1 pc x USB cable 1 PC x Software and Driver CD Note: Only Win XP and Win 7 32-bit operating systems are supported supported, other systems are not supported.