Car Windshield Repair Kit – Windshield repair kit with pressure syringes for repairing windshield chips, cracks, bullseyes, and other windshield cracks.

【IMPROVED DESIGN】 The windshield repair kit comes with 2 bottles of repair resin (3ml), 1 pressure syringe, and a sturdier repair device. It features not only 3 thicker suction cups for better attachment to the glass, but also two positioning holes for easy repair of the windshield edge. The integrated auger is easier to insert into the device, helping the resin spread evenly on the glass for amazing repair results.

【UNIQUE FORMULA】 Newly upgraded with a special high-permeability windshield repair resin, the shear strength can reach 20PA.

Combined with encryption augers, it can help the resin spread evenly on the glass more easily, and the enhanced pressure injector can generate strong pressure to push the windshield repair resin into the crack without damaging the glass, allowing it to penetrate chips or cracks better. Simultaneously, this can prevent air from freezing and affecting the repair effect. 【EFFECTIVE REPAIR】 The professional-grade windshield crack repair kit can quickly and effectively repair small cracks in just 20 to 30 minutes and can effectively reduce the spread of chips and cracks. The vacuum repair support with a 2-point positioning hole easily treats all kinds of windshield cracks and edge cracks, saving you significant time and money and restoring windshields to a near-new condition with a long-lasting maintenance effect. 【EASY TO USE】 The windshield chip repair kit is easy to use for chips and cracks; anyone can use it to repair double-glazed windows. First: Clean and dry the glass surface and attach the repair support to the damaged area; Second: Pour the glass repair fluid into the repair cylinder and push the fluid into the crack; Third: Apply the cured film, let it dry quickly, and solidify it under sunlight/UV light for 10 to 20 minutes. Then, scrape off any remaining resin with a spatula. Widely used: The car windshield crack repair kit is designed to repair all types of chips and cracks in laminated windshields, such as half-moon cracks, bullseye cracks, star-shaped damage, cobwebs, long cracks, scratches, cracks no longer than 12 inches/30 cm, and round damage no larger than one inch in diameter. (Tip: Not suitable for mobile phone screen.)

easy to use

Step 1: Use a pick to remove glass shards.Step 2: Align the center of the positioning circle with the damaged port, and install the suction cup.Step 3: Drop 1-2 drops of repair resin into the pressure cylinder.Step 4: Push the syringe piston to the bottom and install the syringe into the bracket.

Step 5: Slowly pull the piston to the first slot and fix it. Wait for 10 minutes to discharge small bubbles.Step 6: After re installing the syringe, push the piston to the second snap position to fix, and apply pressure on the glue.Step 7: Wait for 5-10 minutes, and observe that the glass breakage disappears at a 45° angle in the car, and the exhaust is completed.Step 8: Remove the suction cup and pressure tool and proceed to the next step.

Step 9: Apply repair fluid, cover with curing film and scrape off excess bubbles.Step 10: Move the vehicle to direct sunlight for 10-30 minutes or cure with UV lamp (not included).Step 11: Tear off the curing film and scrape off the excess resin.Step 12: Repair completed.