Carbon monoxide (CO) and smoke detector, audible and monitoring alarm, fire detector

Features:

1. Description: This standard-sized, portable combination carbon monoxide (CO) and smoke alarm monitors the air for the presence of CO or potential fire. The alarm will generate a loud audible alarm accompanied by the red LED light flashing when the CO is high.
2. Digital LED display shows the level of carbon monoxide detected by the device
3. Alarm Function: The alarm generates a loud audible alarm accompanied by the flashing red LED light when the high CO level is above 100 ppm. When a fire breaks out, the alarm will generate a loud audible alarm accompanied by the flashing blue LED light.
4. The alarm emits four short beeps when carbon monoxide is detected and emits continuous beeps when smoke is detected.The alarm will also emit continuous beeps when smoke and carbon monoxide are detected simultaneously.
5.Low Power Prompt: At low power, the red indicator light flashes once every 20 seconds, while the LCD screen displays Lb.
Specifications:Description:
This standard-sized portable combination carbon monoxide (CO) and smoke alarm monitors for the presence of CO or a potential fire in the air.The alarm will generate a loud audible alarm accompanied by a flashing red LED indicator light when a high level of CO is detected or there is a potential fire. Flexible placement for universal security applications: such as installation in caravans, boats, motorhomes, houses, homes, natural gas detectors, trucks, cars, garages, bathrooms, kitchen areas, households, offices, warehouses, etc...
Features:
Adopts micro-processing control and electrochemical carbon monoxide sensor and infrared photoelectric sensor, high stability, low power consumption and low sensitivity drift.
The digital LED display indicates the level of carbon monoxide detected by the device.
Alarm Function: The alarm generates a loud audible alarm accompanied by the flashing red LED light when the high CO level is above 100ppm. In case of fire, the alarm generates a loud audible alarm accompanied by the flashing blue LED light when the smoke concentration exceeds 0.1% db/m.
The alarm will emit four short beeps when carbon monoxide is detected and will emit continuous beeps when smoke is detected. The alarm will also beep continuously when smoke and carbon monoxide are detected at the same time.
Alarm Memory Peak Level: Displays the peak CO level recorded by the alarm since it was last reset or disconnected.
Low Power Prompt: When the power is low, the red indicator light flashes once every 20 seconds, while the LCD displays "Lb."
Alarm Pause (Mute Mode): In an emergency, press the test button; the LED indicator will flash, indicating that it is in mute mode.
Specification:
Condition: New
Material: Plastic
Color: White
Standby Current:
Alarm Current:
Detection Concentration: 000-999 ppm
Power Supply: 3 x 1.5V AA Batteries (Not Included)
Operating Temperature: 0-50°C
Operating Humidity: 10-95% RH
Sensitive Smoke Sensor: 0.1% dB/m-9.9% dB/m
Sensor: Electrochemical Carbon Monoxide Sensor and Infrared Photoelectric Sensor
Product Size: Approx.105 x 37 mm / 4.13 x 1.46 inches
Package weight: approx.200g

Package contents:
1 x Carbon monoxide detector
1 x Set of mounting screws
Smoke detector protection zone: When the ceiling height is 6 to 12 meters, the protection zone of one detector is 80 square meters for general protection and 60 square meters when the ceiling height is 6 meters.
Installation method:
1.Detectors should usually be installed in bedrooms, living rooms, cars, and other places where people spend a lot of time. It is suggested that they be installed in bedrooms, hallways, basements, cars, and living areas.
2.Since carbon monoxide and smoke concentrations are lighter than air, the detector should be installed 0.3–1 meter below the ceiling.
3.During installation, the detector should not be too close to the fire, as it may be damaged by the flame. It should not be installed near the exhaust fan, the edge of a door or window, or in a bathroom with a high volume of water vapor. Furthermore, it should not be installed in an area with a large amount of oil smoke, as smoke can block the probe in the hole and affect the detector's sensitivity.
This product should not be installed in the following locations:
1.Under normal conditions, there is a location where smoke is trapped.
2.A location with relative humidity above 95%.
3.Areas with high levels of dust, water mist, and oil mist pollution.
4. A location with high wind speeds (greater than 5 m/s).
Caution:
1. This product contains precise components. During transport or installation, it is forbidden to strike or bump the product.Otherwise, the detector may not function.
2.This product is a carbon monoxide and smoke detector, which cannot be used to detect combustible gases (gas, natural gas, liquefied petroleum gas, etc.).
3.This product requires regular maintenance.Remove dust from the surface and keep the air intake clear every month.Every six months, a professional should test it. If it is found to be faulty,It must be repaired or replaced as soon as possible.
4. Do not use detergent or solvent to wipe the detector, as these chemicals can cause permanent damage or temporary contamination of the sensor.
5.Avoid spraying air freshener, hair glue, paint, or any other aerosols near the detector.
6.This product can reduce the occurrence of accidents, but it cannot guarantee complete safety.For your safety, we must not only use this product correctly, but also be vigilant at work and in daily life, in order to improve safety awareness.
Note:
Please note that the new and old versions of this product will be sent randomly, and please ensure this is acceptable to you before ordering.