Carbon monoxide (CO) detector - Installation

Product Description: The leading cause of carbon monoxide (CO) poisoning in everyday life is a lack of precautions when handling fire, heating, and bathrooms at home. In most cases of carbon monoxide poisoning, people use barbecues, charcoal stoves, or a generator during a power outage. To prevent carbon monoxide poisoning, carbon monoxide detectors can be installed in areas where it is likely to be produced, such as kitchens and bathrooms, to detect leaks in time. You should install these detectors even if there is no actual source of carbon monoxide in your home. Carbon monoxide detectors are standalone, battery-operated devices with built-in CO sensors that protect you and your family from the dangers of carbon monoxide. If you use a gas cooker, oven or fireplace, a carbon monoxide detector is a handy system that detects carbon monoxide even at low concentrations and triggers an audible and visual alarm (flashing red LED) to protect you. Poisoning. Important Note: This product is designed exclusively for the detection of carbon monoxide, not carbon dioxide. Product Features: Powerful 85 dB alarm (85 dB / 3 m) Test/Reset Button Electronic Sensor Maximum Value Memory LCD Display of CO Concentration (ppm) LED Indicator (Red = Alarm, Green = Operating) Low Battery Warning, operates on three 1.5V AA batteries. Audible Mode with four short warning tones. In alarm mode, the red indicator flashes. Ideal Mounting Location: Wall or ceiling. Minimum distance of 3 m from the fire source. Do not install in a ventilated area (fan or air conditioner). The mounting location must have free access to ambient air. (e.g., not behind curtains). Technical data: Power supply: 3 AA batteries, 1.5 V Sensitivity and duration: 50 ppm, alarm in 60 to 90 minutes 100 ppm, alarm in 10 to 40 minutes 300 ppm, alarm in 3 minutes Standby current: <50 µA (without LCD screen); <200 µA (with LCD screen) Alarm current: <75 mA Operating environment: 5–40 °C, 20–90% relative humidity. Note: If the CO detector displays nothing on the LCD screen after inserting the batteries, if no audible alarm sounds when you press the button, or if the LED does not flash, try adjusting the battery contact spring according to the following instructions. Package contents: 1 x Carbon Monoxide Detector (batteries not included)