Cat flap, waterproof cat flap with four-way rotary lock, suitable for cats, small dogs, easy to install and use, upgraded version, coffee color

Product Description

External dimensions (L x W x H): 19 x 22 x 5 cm Internal dimensions (L x W x H): 16 x 16.5 x 5 cm Suitable for cats weighing less than 7 kg and with a waist circumference of less than 40 cm. Note: 1). Please make sure the width and height

(shoulder height) of your pet are smaller than the pet screen door, thank you. 2) The magnet at the bottom of the door frame is used to align the rolling door after it moves, it cannot be used as a lock, thank you. Improved product features: 1. Convenient push-button switch, you can easily control your cat or other cats' entry or exit options, enter only, exit only, enter and exit, completely locked.

2. The fixing groove with snaps can effectively prevent the weatherproof brush strip from falling off and help to fix it.

3. The depth of the tunnel can be reduced, plus 1 pack of long screws + 1 pack of short screws, double-sided tape to meet your needs, installed on different types of interior doors, exterior doors, walls, windows, cabinets,

glass, etc.

Installation instructions

1. Trace the outline of the door. Draw the frame of the cat flap on a piece of cardboard and cut it out. Use a pencil to draw a circle along the edge of the cutout on the door where you want to stick it. Notes: 1. It is best

to first prepare the necessary tools: pencil, utility knife, electric saw, drill, screwdriver, and double-sided tape.

2. If you can use the product itself to directly draw the outline of the outer door frame, that will be fine.

2. Drill the tunnel holes. First, use an electric drill to drill the corners of the 4 deep holes, then use an electric saw to drill the tunnel holes starting from the drilled holes. Note: the installation height

average is generally about 10 to 15 cm from the ground.

3. Reduce the depth of the tunnel if necessary. If the cat flap is too thick for your door, use scissors or a cutter to cut out part of the tunnel along line A or B. Cut to a size of about 2 to 4 cm.

4. Wrap the tunnel hole. Once the tunnel has been dug, it is best to wrap it with a layer of wood veneer.

5. Install the door. Use double-sided tape to install the cat flap on the door. 8 screws are provided for your use, please tighten them with the screwdrivers on both sides. NOTE: there are 8 screws in each of the 4 holes

on each side, please screw them all in on both sides as shown in the image above. These 8 screws are designed to work together, they are not short.

6. Finish. Place the nut on the screw hole and press it. The installation is now completely finished.