Ceiling 140LED modern for room to bed, living room, desk, room to eat, lighting AC85-265V

Features:

1. The housing of the ceiling is aluminum high-quality + gel of silice, with a color and a texture aretes.

2. The flow bright is of 3000LM, high brightness, low attenuation of the light, not of flicker visible, large area illumination, 30‑40㎡can be irradie, low energy consumption, long service life.

3. Equipped instructions graphiques, a set complete accessories, easy to install and to use.

4. The base is in iron high-quality, 4 arm of lamp to LED, aluminum alloy and in silicone, sturdy and durable, long service life and high-quality.

5. The design simple and unique, associee to the light cold natural, fits to the desk, to the room to eat, to the desk, to the room, to the desk, to the coffee and to other places.

Specifications:

Item Type : Ceiling

Material : Iron + Aluminum + Silicone

Weight : Approx. 712 g / 25,1 oz

Objective : lighting household

Width combined : approx. 55 cm / 21,7 inches

Height combined : approx. 6 cm / 2,4 inches

Diameter of the bracket of lamp : approx. 14 cm / 5,5 inches

Voltage input : AC85-265V

Color of the light : light white

Number of LED : 35 LED for a notule strip, 140 LED for four strip (35x4)

Power : 25 W

br>Brightness : 3000LM

Temperature of color : 6000-6500K

Color of the housing : silver

Area illumination : 30-40㎡

service life : 50000H

How to Use : 1. Install the frame of fastening of base : remove the frame of fastening of the chassis of the lamp, then use the tube of screw trombone and the screw for install the frame of fastening to the ceiling. 2. Install the tube of the lamp and the wire of ground : pass lathe to lathe the screw of the tube of the lamp to through the small hole of the bracket of lamp, fixed-the with a seal and a screw, and install the wire of ground and perpendiculaires tubes of the lamp set. 3. Adjustment of the lamp, combination parallel. 4. Install the wiring : connect the wiring of the lamp and adapter sector in series, and the head male to the head female is connected in series. 5. Install the power cord : cut first power supply, then connect other end of adapter sector to power supply electric, the voltage is of AC85-265V. 6. Finally, unscrew the screw of the frame of fastening of the base, align the base with the frame of fastening and use the screw devissees for you connect to the frame of fastening to through the small holes of the base. 7. Completed installation, on power supply electric and on the lights (for didacticiels graphiques detailles, please you refer to the manual).

Package List:

4 x tube bright 1 x adapter sector 1 x chassis of lamp 1 x manual 1 x key< /p> 4 x Seal 4 x Cap to screw 1 x Bag installation (2 x Screw pointues, 2 x Tube trombone to screw) 1 x wire of ground yellow