Ceiling fan remote control kit, smart universal remote control for ceiling fan and light for Hunter's Harbor Breeze

1. COMPATIBLE RANGE: The ceiling fan remote control works well with most ceiling fans and is compatible with Hunter, HarborBreeze, and other well-known ceiling fan brands. Compatible with CFL, incandescent, and LED bulbs. 2. 3-Speed Fan Speed: The ceiling fan remote control kit includes a separate button for the 3-speed fan, designed to control the speed and light of the ceiling fan independently. Includes a wall mount for the manual remote control. 3. CONTROL BUTTONS: Includes 4 separate fan control buttons: 3 speeds (high, medium, and low) and off. 4 separate remote control timer and setting buttons: 1h, 2h, 4h, 8h. 1 button controls the lamp switch (no dimming). 4. BEEP: Press and hold the remote control's off button to activate or deactivate the beep. The default setting is the beep. You can activate or deactivate the beep at any time. Please note that the receiver does not have a reverse function. 5. EASY INSTALLATION: By default, one remote control can only control one fan, but once the remotes are cut, one remote can control multiple fans. Very easy to install: blue on blue, white on white, black on black. 6. SPECIAL NOTE: The replacement ceiling fan remote control converts an ordinary ceiling fan into a remote-controlled ceiling fan. Please note that this kit may not support certain fans that can only operate with the original kit. Specification: Item Type: Ceiling Fan Remote Control Kit. Material: Environmentally Friendly ABS. Purpose: Ceiling fan pilot control receiver remote control Size: controller: approx. 13.6x4.5x1.8cm/5.4x1.8x0.7in, remote control: approx. 11.5x5.4x2.6cm/4.5x2.1x1.0in Battery parameters: 2 AAA batteries (2 AAA dry alkaline batteries): nominal voltage: 1.5V, capacity: 900mAh. Product Specifications: Input Voltage: 110V Maximum Fan Power: <100W Maximum Optical Power: Wireless Transmission: RF433MHz Fan Speed: High, Medium, and Low Countdown Timer: 1h, 2h, 4h, 8h Audible Switch: Yes Fan Rotates in Reverse: No Gross Weight: 300g/10.6oz Package List: 1 Transmitter 1 Receiver 1 Transmitter Stand Note: Important: (Battery-free product) 1. Carefully check the receiver size to ensure there is sufficient space on the fan canopy to install the receiver. 2. No mechanical relays, no arcing, no inrush current, zero-crossing detection technology. 3. Only the lights can be turned off without dimming; and the fan will run at low, medium, and high speeds. 4. The receiver does not have a reverse function. 5. The beep can be turned on or off via remote control at any time. Preventive measures: 1. The receiver should not be installed face down to avoid uneven ceilings and covers. 2. The receiver has separate input and output connections. Do not modify the input and output wiring. 1. Output at will (to prevent the printed circuit board from burning out). 2. Product operating voltage: 110V. 3. If there is a cable switch and a remote control receiver on the fan, please pull the fan cable switch towards the top of the light switch to turn on the light before using the remote control. 4. Please refer to the description of the cable and wiring harness color (do not expose the core to cause a short circuit). 5. When using the remote control, check that the battery is installed (pay attention to the positive and negative terminals of the battery). Each time the control button on the handle is pressed, the light flashes once. Please allow for some error due to manual measurement.