Ceiling light modern strip light LED parallel for living room bedroom white AC85-265V

Features:

1. The housing uses a material aluminum + silicone high-quality, and the base in iron, durable and durable.

2. With 2 arm of lamp to arc LED, they can be installed in croix or in parallel for meet to the different needs aesthetic.

3. High brightness, low gradient of the light, not of stroboscope visible and the area illumination is mmresistance 10-25㎡.

4. Equipped of manually graphiques, a set complete accessories, a easy installation and a long service life.

5. The lamp to LED has a low energy consumption, a energy saving and a energy saving, and fits to lighting household.

6. Design simple, suitable to the restore, offices, bedroom, rooms study, coffees and other places.

Specifications:

Item Type : Ceiling

Material : Iron + Aluminum + Silicone

Objective : Lighting household

Voltage input : AC85-265V

Color of the light : Light white

Number of LED : 35 LED for a notule strip, 70LED for 2 strip (35x2)

Power : 14 W

Brightness : 2000LM

Temperature of color : 6000-6500K

Color of the housing : Silver

Area illumination : 10-25㎡

service life : 50 000 H

Weight : approx. 441 g / 15,6 oz

Width of the combination : approx. 53 cm / 20,9 inches

Height of the combination : approx. 8 cm / 3,1 inches

Diameter of the bracket of lamp : approx. 12 cm / 4,7 inches

How to Use : 1. Install the frame of fastening of base-installations-the to the ceiling with tubes to screw trombone and screw 2. Install the tube of lamp and the wire of ground - stick first the disc to three holes on the bracket of lamp, then pass lathe to lathe the screw on the tube of lamp to through the small holes of the bracket of lamp, and washers with washers and screw, the wire of ground and perpendiculaires them The lamps are assemble 3. The tube of the lamp can be adjusted according your shape preferred and it can be combined in croix or in parallel. 4. Install the wiring : connect the wiring of the lamp and adapter sector in series, and the head male to the head female are connect in series 5. Install the power cord : cut first power supply, then connect other end of adapter sector to power supply electric, the voltage is of AC85-265V 6. Finally, unscrew the screw of the frame of fastening of the base, align the base with the frame of fastening and use the screw for you connect to the frame of fastening to through the small holes of the base 6. Completed installation, on power supply electric and on the lights (for didacticiels graphiques detailles, please you refer to the manual)

Package List:

2 x strip of lamp 1 x adapter sector 1 x chassis of lamp 1 x manual 1 x key< /p> 2 x seal 1 x nut to head round 3 x cap to screw 1 x kit installation (2 x screw pointues, 2 x tube trombone to screw) 1 x wire of ground yellow

Note:

1. Please allow a error of 0 to 1 inch due to the measurement manual. Thank you of your understanding.2. The monitors are not calibrated of the same way, the color of the item displayed on the photos can be slightly different of item actual. Please take the really in standard.