Ceiling light modern strip light LED parallel for salon bedroom white AC85-265V

Features:

1. The shell uses aluminum material + silicone high-quality, and the base in iron, durable and durable.

2. With 2 arm of lamp to arc LED, they can be installed in croix or in parallel for meet to the different needs aesthetic.

3. High brightness, low gradient of the light, No stroboscope visible and the area of illumination is d'approx. 10-25㎡.

4. Equipped of manually graphiques, of a set complete of accessories, of a installation easy and of a long service life.

5. The lamp to LED has a low energy consumption, a energy saving and a energy saving, and suitable for the lighting household.

6. Design simple, suitable to the restore, offices, bedroom, rooms of study, coffees and other places.

Specifications:

Item Type: Ceiling light

Material: Iron + Aluminum + Silicone

Objective : Lighting household

Voltage of input : AC85-265V

Color of the light : White light

Number of LED : 35 LED for udoes notule strip, 70LED for 2 strip (35x2)

Power : 14 W

Brightness : 2000LM

Color Temperature : 6000-6500K

Color of the shell : Silver

Area of illumination : 10-25㎡

Service Life : 50 000 H

Weight : approx. 441 g / 15,6 oz

Width of the combination : approx. 53 cm / 20,9 inches

Height of the combination : approx. 8 cm / 3,1 inches

Diameter of the bracket of lamp : approx. 12 cm / 4,7 inches

How use : 1. Installations the frame of fastening of base-installations-the at the ceiling with tubes to screw d'expansion and of screw 2. Installations the tube of lamp and the wire of ground - stick of first the disc to three holes on the bracket of lamp, then pass tour to tour the screw on the tube of lamp through the small holes of the bracket of lamp, and fixed-the with washers and of screw, the wire of ground and the a of them The lamps are assemble 3. The tube of the lamp can be adjusted according to your shape preferred and it can be combined in croix or in parallel. 4. Installations the wiring : connect the wiring of the lamp and the adapter sector in series, and the head male to the head female are connect in series 5. Installations the cord of power supply : cut of first the power supply, then connect the other end of the adapter sector to l'Power Supply, the voltage is of AC85-265V 6. Finally, unscrew the screw of the frame of fastening of the base, align the base with the frame of fastening and use the screw for you connect at the frame of fastening through the small holes of the base 6. Completed installation, on l'Power Supply and on the lights (for didacticiels graphiques detailles, please you refer at the manual)

List of package:

2 x strip of lamp 1 x adapter sector 1 x chassis of lamp 1 x manual 1 x key< /p> 2 x seal 1 x nut to head ronde 3 x cap to screw 1 x kit of installation (2 x screw pointues, 2 x tube d'expansion to screw) 1 x wire of ground yellow

Note:

1. Please allow a error of 0 to 1 inch due to the measured manual. Thank you of your understanding.2. The monitors are not calibrated of the same way, the color of the item displayed on the photos can be slightly different of the object actual. Please take the really in standard.